Panasonic KX-TD816CE Installation Manual

Also see for KX-TD1232CE: User manual addendum Installation manual Installation manual User manual addendum User manual

Contents

Panasonic KX-TD816CE Installation Manual Manual pdf 63 page image

4.6 CO Line ProgrammingCO Line Group Assignment40163Description Each CO line must be assigned to a CO line group. This programdefines the CO line group assignment for each CO line. Forexample, if there are multiple telephone service companiesavailable, the CO lines can be grouped by company.Selection • CO line number: KX-TD816 – 01 through 08,KX-TD1232 – 01 through 54,( =all CO lines))• CO line group (TRG) number: 1 through 8Default CO01 – TRG 1; CO05 – TRG 5; (for KX-TD816/1232)CO02 – TRG 2; CO06 – TRG 6; (for KX-TD816/1232)CO03 – TRG 3; CO07 – TRG 7; (for KX-TD816/1232)CO04 – TRG 4; CO08 – TRG 8; (for KX-TD816)CO08 through CO54 – TRG 8 (for KX-TD1232)Programming 1. Enter 401.Display : Trunk Group Asn2. Press NEXT.Display: CO Line NO?–>3. Enter a CO line number.To enter CO line number 01, you can also press NEXT.Display example: CO01:TRG14. Enter the CO line group number.To change the current entry, enter the new CO line group number.5. Press STORE.6. To program another CO line, press NEXT or PREV, orSELECT and the desired CO line number.7. Repeat steps 4 through 6.8. Press END.Conditions • For the KX-TD1232, CO 01 through CO 12 are for the Master systemand CO 13 through CO 24 are for the Slave, if available.• CO 25 through CO 54 become available when the KX-TD290expansion unit is installed in the KX-TD1232.• To assign all CO lines to the same CO line group, press the key instep 3. In this case, the display shows the contents programmed forCO 01.Feature Reference Section 3, Features — Installation ManualCO Line Group