Panasonic KX-TD816CE Installation Manual

Also see for KX-TD1232CE: User manual addendum Installation manual Installation manual User manual addendum User manual

Contents

Panasonic KX-TD816CE Installation Manual Manual pdf 34 page image

4.6 CO Line ProgrammingISDN Line Number Assignment34418Description Assigns your telephone number of the ISDN network line. Yourtelephone number is informed to the called party with the CLIP(Calling Line Identification Presentation) feature offered by theISDN network service.Selection • CO line number: KX-TD816 – 05 through 08KX-TD1232 – 09 through 12, 21 through 24• Telephone number: 16 digits (max.)Default All CO lines – Not storedProgramming 1. Enter 418.Display: ISDN CO NO.2. Press NEXT.Display: CO Line NO?→3. Enter a CO line number.To enter CO line number 05 for KX-TD816 or 09 for KX-TD1232,you can also press NEXT.Display example: CO09:Not Stored4. Enter the telephone number.To delete the current entry, press CLEAR. To change the currententry, press CLEAR and the new number.5. Press STORE.6. To program another CO line, press NEXT or PREV, orSELECT and the desired CO line number.7. Repeat steps 4 through 6.8. Press END.Conditions • In the case of KX-TD1232, CO09 through CO12 are for the MasterSystem and CO21 through CO24 are for the Slave, if available.• To display parts of the number which have scrolled off the display,press or .• Your telephone number is informed to the called party if outgoing CLIRfeature is disabled for the ISDN line by program [419] “ISDN OutgoingCLIR Service Assignment.”Feature References Section 3, Features,CO Incoming Call Information DisplayCO Incoming Call Information LogDirect Dialing In (DDI)