1.5 During a ConversationOperations 1-41Basic OperationsPlacing a Call in System Parking Area (Call Park)Allows you to place a held call into a system parking area. You can release from the parkedcall to perform other operations. The parked call can be retrieved by any extension user.Up to 10 calls can be parked.PT and SLTFor a PT: Press HOLD.For an SLT: Flash the hookswitch.Dial 22.22Confirmation toneand dial toneConfirmation toneand dial toneEnter a parking zone number(0 through 9).parking zone no.During a conversationHOLDFor an SLTFor a PT• If you hear a busy tone, it indicates the specified parking zone isunavailable.• You do not need to redial the feature number to change the parkingzone. Just enter the parking zone number while hearing the busy tone.PT and SLTConfirmation toneand dial toneDial 52. Enter a parking zone number(0 through 9) where the callis parked.5 2 parking zone no.Lift the handset or pressSP-PHONE/MONITOR.You can talkto the party.• If there is no held call, you will hear a reorder tone.Retrieving a parked call• If a parked call is not retrieved within a pre-determined time (default: 30 seconds), ringingwill be heard (Hold Recall).• If a parked call is not retrieved within 30 minutes, it will be automatically disconnected.• This feature is useful when you want to hold more than one intercom call with a PT, ormore than one intercom or outside call with an SLT.• During a 5-party conference, you cannot use this feature.• 1.7 Useful Features, “Conference (5-party)”• See the Installation Manual, Section 3, “Call Park”.PT!!+Technical Manuals Online! - http://www.tech-man.com
