1.5 During a Conversation1-40 OperationsRetrieving a Call on Hold (Call Hold Retrieve)• “Call Park” and “Exclusive Hold” cannot be retrieved by this feature.• You can hear a confirmation tone when the call is retrieved by entering the feature number.• 1.5 During a Conversation, “Placing a Call on Hold (Call Hold)”• See the Installation Manual, Section 3, “Hold”.Allows you to retrieve a call that has been placed on hold by another extension.Retrieving an outside call on holdPT and SLT PTEnter the held outside(CO) line number(1 through 6).CODial 53.outside (CO) line no.5 3Lift the handset orpressSP-PHONE/MONITOR.Press the CO whose indicatoris flashing red slowly.ConfirmationtoneAt the other extension At the other extension• The CO indicator lightturns steady green.Retrieving an intercom call on holdPT and SLTEnter the holding extensionnumber (100 through 199).Dial 5.extension no.5Lift the handset or pressSP-PHONE/MONITOR.Confirmation toneAt the other extension!!+• During a 5-party conference, you cannot use this feature.• If a held call is not retrieved within a pre-determined time (default: 30 sec.), ringing will beheard (Hold Recall).• If an outside call is placed on hold and not retrieved within 30 minutes, it will beautomatically disconnected.• With outside calls, you can put multiple calls on exclusive hold. However, with intercomcalls, you can put only one call on exclusive hold.• 1.5 During a Conversation, “Placing a Call on Hold (Call Hold)”• 1.7 Useful Features, “Conference (5-party)”• See the Installation Manual, Section 3, “Hold”.PTPTPTPT!!+Technical Manuals Online! - http://www.tech-man.com
