Panasonic KX-TD500CE Programming Manual

Also see for KX-TD500CE: User manual Features guide

Contents

Panasonic KX-TD500CE Programming Manual Manual pdf 98 page image

2.9 Language Data98 System2.9 Language DataDisplay LanguageThe KX-TD500 System provides two different languages as the Display Language at the sametime, which is shown on the display of a Panasonic Proprietary Telephone (PT). Each PT usercan choose English (default) or Optional Language, so PTs on the same KX-TD500 Systemcan display different languages.Optional LanguageOne of the following four Optional Languages is available with the KX-TD500 System:French, Dutch, Spanish or Portuguese.French is stored as the default Optional Language at the factory.Language Data FileIf you want to use the Optional Language other than French, please upload the appropriateLanguage Data File distributed with the PC System Programming Installation media.< Uploading the Language Data to the KX-TD500 System >< System Programming >When the uploading of the Language Data is finished;Notes• The uploaded Language Data remains intact after the termination of system operation /system reset.• To clear the uploaded Language Data, set the Operation Switch (MODE) to the position"5" and start up the system in off-line mode.1. Start up the System in on-line mode.2. Connect the PC System Programming device (Windows PC) to the KX-TD500System and go into the Interactive mode.3. Point to "2-8 Language Data" from the "Programming - 2. System" drop-downmenu and click.• The "Language Data Selection" dialogue box is displayed.4. Select the appropriate Language Data file and click "OK."• Uploading of the Language Data from PC to the KX-TD500 System begins.• Uploading takes about 5 minutes.1. Go to "4-2 Extension Line" screen and choose "Option" in "Language" menu.2. Click "OK" or "Apply" to save the data change.