Panasonic KX-TD1232AL User Manual Addendum

Also see for KX-TD1232AL: Installation manual User manual addendum User manual

Contents

Panasonic KX-TD1232AL User Manual Addendum Manual pdf 38 page image

383.2 User Programming (Manager Programming)Extension Name Set004Description Assigns names to the extension numbers programmed in program [003]“Extension Number Set.”Selection • Jack number: 01 through 64 (-1 / -2) (-1 = first part, -2 = second part)• Name: 10 characters (max.)Default All jacks – Not storedProgramming 1. Enter 004.Display: EXT Name Set2. Press NEXT.Display: Jack NO?->3. Enter a jack number.To enter jack number 01, you can also press NEXT.To select the second part (-2), press NEXT after entering a jack number.Display: #01-1:Not Stored4. Enter a name.For entering characters, see “Station Speed Dialing Number/NameAssignment” in Section 2.2 “Programming.”To delete the current entry, press CLEAR.To change the current entry, press CLEAR and the new name.5. Press STORE.6. To program another jack, press NEXT or PREV, or SELECT and thedesired jack number.7. Repeat steps 4 through 6.8. Press END.Conditions • There is a maximum of 128 names for KX-TD1232. Each name has amaximum of 10 characters.• Program [003] “Extension Number Set” is used to assign extensionnumbers.• Jack numbers 01 through 32 are for the Master System and 33 through 64are for the Slave, if available.• For an explanation of jack numbering, see “Rotation of jack number” onpage 29.