Panasonic KX-TD1232AL User Manual Addendum

Also see for KX-TD1232AL: Installation manual User manual addendum User manual

Contents

Panasonic KX-TD1232AL User Manual Addendum Manual pdf 35 page image

353.2 User Programming (Manager Programming)System Speed Dialing Name Set 002Description Assigns names to the system speed dial numbers assigned in program [001]“System Speed Dialing Number Set.” The KX-T7235 shows the stored namewhen performing System Speed Dialing. The stored names are applied to theCO Incoming Call Information Display / Log features.Selection • Speed dial number: 000 through 499• Name: 10 characters (max.)Default All speed dial numbers – Not storedProgramming 1. Enter 002.Display: SPD Name Set2. Press NEXT.Display: SPD Code?->3. Enter a speed dial number.To enter speed dial number 000, you can also press NEXT.Display example: 000: Not Stored4. Enter a name.For entering characters, see Section 2.2 “Programming.”To delete the current entry, press CLEAR.To change the current entry, press CLEAR and the new name.5. Press STORE.6. To program another speed dial number, press NEXT or PREV, orSELECT and the desired speed dial number.7. Repeat steps 4 through 6.8. Press END.Conditions • Speed dial numbers are programmed in program [001] “System SpeedDialing Number Set.”• There is a maximum of 500 names. Each name has a maximum of 10characters.Feature References Installation Manual, Section 3, Features,CO Incoming Call Information DisplayCO Incoming Call Information LogSpecial Features for KX-T7235 — System Speed DialingSystem Speed Dialing