Panasonic KX-TCD340FX Operating Instructions Manual

Also see for KX-TCD340FX: Quick guide

Contents

Handset Settings315 Select the desired setting, then press,.6 Press {ih}.Note:L If “Base Number” is selected and thecurrent base unit number is 2, “-2-” isdisplayed.L If “Handset Number” is selected and thecurrent handset number is 2, “[2]” isdisplayed.Changing the display language1 Press $ (middle soft key).2 Select Y, then press ,.3 Select “Display Setup”, then press,.4 Select “Select Language”, thenpress ,.5 Select the desired language, then press,.6 Press {ih}.Note:L If you select a language you cannot read,press {ih}, $, press {v}, press,, press {v} 2 times, press ,,press {v} 3 times, press ,, select thedesired language, then press ,. Press{ih}.Changing the display contrastThis feature is available for wallpaper anddisplay icons.1 Press $ (middle soft key).2 Select Y, then press ,.3 Select “Display Setup”, then press,.4 Select “Contrast”, then press ,.5 Press {e} or {v} repeatedly to selectthe desired contrast, then press ,.6 Press {ih}.Call optionsTurning call bar on/offThis feature prohibits making outside callswith the handset. When call bar is turned on,only intercom calls and calls to emergencynumbers (page 36) can be made. Call barcan be set independently for the handsetand the base unit (page 37).1 Press $ (middle soft key).2 Select Y, then press ,.3 Select “Call Options”, then press,.4 Select “Call Bar”, then press ,.5 Enter “0000” (default handset PIN).L If you changed the PIN, enter it (page32).6 Select “On” or “Off”, then press ,.7 Press {ih}.Note:L When call bar is turned on, x isdisplayed.Turning auto talk on/offWhen this feature is turned on, you cananswer calls simply by lifting the handset offthe base unit. You do not need to press{C}.1 Press $ (middle soft key).2 Select Y, then press ,.3 Select “Call Options”, then press,.4 Select “Auto Talk”, then press ,.5 Select “On” or “Off”, then press ,.6 Press {ih}.TCD340FX(e).book Page 31 Wednesday, June 8, 2005 3:57 PM