Panasonic KX-TCD210G Operating Instructions Manual

Also see for KX-TCD210G: Quick guide

Multi-unit Operation38L If you changed the PIN, enter it (Seite 26).4 Select “Andere Optionen”, then press{>}.5 Select “Wiederholmodus”, then press{>}.6 Select “Ein” or “Aus”, then press {>}.7 Press {ih}.Hinweis:L After turning repeater mode on/off, you will notbe able to make or receive calls for a fewmoments.Intercom between handsetsIntercom calls can be made between handsets inthe same radio cell, but not between handsets indifferent radio cells.Beispiel: When handset 1 calls handset 21 Handset 1:Press {INT} and {2} (desired handsetnumber).2 Handset 2:Press {C} or {s} to answer.3 When finished talking, press {ih}.Transferring calls betweenhandsets, conference callsOutside calls can be transferred between 2handsets in the same radio cell. 2 handsets in thesame radio cell can have a conference call withan outside party.Beispiel: When handset 1 transfers a call tohandset 21 Handset 1:During an outside call, press {INT} and {2}(desired handset number).L The outside call will be put on hold.L If there is no answer, press {INT} to returnto the outside call.2 Handset 2:Press {C} or {s} to answer the page.L Handset 2 can talk with handset 1.3 Handset 1:To complete the call transfer, press {ih}.To establish a conference call, press {3}.Transferring a call without speaking to theother handset user1 During an outside call, press {INT}, thenpress the desired handset number.L The other handset rings if it is within rangeof the base unit and turned on.2 Press {ih}.L The outside call rings at the other handset.Hinweis:L k flashes to indicate the outside call is onhold.L If the other handset user does not answer thecall within 1 minute, the call will ring at yourhandset again.TCD210G(e-g).book Page 38 Friday, January 14, 2005 1:42 PM