Panasonic KX-TCD210G Operating Instructions Manual

Also see for KX-TCD210G: Quick guide

Base Unit Settings26Other optionsChanging the base unit PIN (PersonalIdentification Number)For security, the base unit PIN must be enteredwhen changing certain settings. The default PINis “0000”.Wichtig:L If you change the PIN, please make note ofyour new PIN. The unit will not reveal the PINto you. If you forget your PIN, consult yournearest Panasonic service centre.1 Press {j/OK}.2 Select “Basis-Einstell.”, then press{>}.3 Enter “0000” (default base unit PIN).L If you changed the PIN, enter it.4 Select “Andere Optionen”, then press{>}.5 Select “Basiseinh. PIN”, then press {>}.6 Enter the new 4-digit base unit PIN, thenpress {j/OK}.7 Press {ih}.Resetting the base unit to its defaultsettings1 Press {j/OK}.2 Select “Basis-Einstell.”, then press{>}.3 Enter “0000” (default base unit PIN).L If you changed the PIN, enter it (Seite 26).4 Select “Andere Optionen”, then press{>}.5 Select “Basis Zurückst.”, then press{>}.6 Select “Deutschland”, then press {>}.7 Select “Ja”, then press {>}.8 Press {ih}.Hinweis:L The following items will be deleted or reset totheir default settings:– Settings listed on Seite 22, 32– All SMS messages– Private mailbox settings for SMS– Caller listL The following items will be retained:– Date and time– Repeater modeL If you select “Österreich” as the country instep 6, the following default settings will bechanged for Austria:– Message centre 1 and 2– Recall time– Emergency numberIf you select “Österreich” in step 6 bymistake, repeat this procedure and select“Deutschland” in step 6.L After resetting the base unit, you will not beable to make or receive calls for a fewmoments.TCD210G(e-g).book Page 26 Friday, January 14, 2005 1:42 PM