1.4 During a ConversationUser Manual 49Call ParkYou can put a call on hold in a common parking zone of the PBX so that any extensioncan retrieve the parked call. You can use this feature as a transferring feature.A call can be put into either a specified parking zone (Specified) or any idle parking zone(Auto). If a Call Park button and Call Park (Automatic Park Zone) button have beenestablished, you can select either way to park by simply pressing the correspondingbutton.When a call is parked automatically, or more than one call has been parked at the sametime, you need to specify the parking zone number to retrieve the required call.To set• The CO or INTERCOM button light shows the current status as follows:— Regular Hold modeFlashing green slowly: Your held callFlashing red: Another extension’s held call— Exclusive Call Hold modeFlashing green rapidly: Your held callRed on: Another extension’s held call•Hold Mode Change (PT only)After pressing the HOLD button, if you press the HOLD button again, the statusswitches from the Regular Hold mode to the Exclusive Call Hold mode or fromthe Exclusive Call Hold mode to the Regular Hold mode.•For simple operation, you can automatically hold a call by pressing anotherCO, G-DN or INTERCOM button, only if preprogrammed.(Automatic CallHold) Consult your dealer.During a conversationPressCall Park.PT/PS(Call Park)
