Panasonic KX-HNH100E Operating Instructions Manual

Other programmingChanging the handset nameYou can customise the name of your handset.This can help you easily identify handsetswhen making intercom calls, transferring callsto other handsets, etc. You can select whetheror not the handset name is displayed instandby mode. The default setting is “No”. Ifyou select “Yes” without entering any handsetname, “Handset 1” to “Handset 6” isdisplayed.1 M N#1042 Enter the desired name (10 charactersmax.). a MOKN3 MbN: Select the desired setting. a MOKN2 times a MeNCall restrictionYou can restrict selected handsets fromdialling certain numbers. You can assign up to6 phone numbers to be restricted, and selectwhich handsets are to be restricted. Storingarea codes here prevents the restrictedhandsets from dialling any phone number inthat area code.1 M N#2562 Enter the hub PIN (default: “0000”).R If you forget your PIN, see page 49.3 MbN: Select the desired unit. a M NR All handsets registered to the hub aredisplayed.R “ ” is displayed next to the selectedhandset numbers.R To cancel a selected handset, pressM N again. “ ” disappears.4 MOKN5 Select a memory location by pressing 1to 6. a MOKN6 Enter the phone number or area code tobe restricted (8 digits max.). a MOKN aMeNNote:R You can also select your mobile device inthis feature using a handset, if your mobiledevice is registered to the hub. For moreinformation, refer to the User’s Guide(page 43).Changing the hub PINImportant:R If you change the hub PIN (PersonalIdentification Number), please make note ofyour new PIN. The unit will not reveal thePIN to you. If you forget your PIN, seepage 49.1 M N#1322 Enter the current 4-digit hub PIN (default:“0000”).3 Enter the new 4-digit hub PIN. a MOKN4 MbN: “Yes” a MOKN a MeNRegistering a handset to the hubIf for some reason the handset is notregistered to the hub (for example, isdisplayed even when the handset is near thehub), re-register the handset.1 Handset:M N#1302 Hub:Press and hold M A HANDSET/LOCATORN until the LED indicator blinksin green.R If all registered handsets start ringing,press M A HANDSET/LOCATORNagain to stop, then repeat this step.3 Handset:MOKN a Wait until “Hub PIN” isdisplayed. a Enter the hub PIN (default:“0000”). a MOKNR If you forget hub PIN, see (page 49).Deregistering a handsetA handset can cancel its own registration tothe hub, or other handsets registered to theHelpline Tel. No.: U.K. 0330 3331112 Ireland 01 4475228 31ProgrammingHNH100E_(en_en)_0421_ver.051.pdf 31 2015/04/22 19:08:47