Setting upConnectionsConnect the AC adaptor plug to the unitby pressing the plug firmly.Connect the AC adaptor to the poweroutlet.Note:R Use only the supplied Panasonic ACadaptor PNLV233E.1 2Battery installationR USE ONLY rechargeable Ni-MH batteriesAAA (R03) size (1 ).R Do NOT use Alkaline/Manganese/Ni-Cdbatteries.R Confirm correct polarities ( , ).1Battery chargingCharge for about 7 hours.R Confirm “Charging” is displayed (1 ).R When the batteries are fully charged,“Fully Charged” is displayed.1Note when setting upNote for connectionsR The AC adaptor must remain connected atall times. (It is normal for the adaptor to feelwarm during use.)R The AC adaptor should be connected to avertically oriented or floor-mounted ACoutlet. Do not connect the AC adaptor to aceiling-mounted AC outlet, as the weight ofthe adaptor may cause it to becomedisconnected.Note for battery installationR Use the supplied rechargeable batteries.For replacement, we recommend using thePanasonic rechargeable batteries noted onpage 3, 8.Note for battery chargingR It is normal for the handset to feel warmduring charging.R Clean the charge contacts of the handsetand charger with a soft and dry cloth once amonth. Before cleaning the unit, disconnectfrom power outlets. Clean more often if theunit is exposed to grease, dust, or highhumidity.Helpline Tel. No.: U.K. 0330 3331112 Ireland 01 4475228 11Getting StartedHNH100E_(en_en)_0421_ver.051.pdf 11 2015/04/22 19:08:46