Device signal strengthYou can check the signal strength of each device’s wireless connection to the hub.1 From the [Home Network] app home screen, tap [Settings].2 Tap [Device Registration].3 Tap [Signal Strength].4 Select the type of device that you want to check.5 Tap the name of the device that you want to check.R For devices powered by a battery (such as sensors), press the registration button ( ) on thedevice when prompted.6 Confirm the number of blue bars.R More blue bars indicate a stronger signal.Strongest signalGood signalWeak signalWeakest signal (connection may be unreliable)No signalNotification settingsYou can select which types of status notifications are displayed, and which are not.Important:R In order to receive notifications, your mobile device must be able to access the Internet. If your mobiledevice is not connected to a Wi-Fi network, a mobile network connection is required.1 From the [Home Network] app home screen, tap [Settings].2 Tap [Notification Settings].3 Change the settings as desired.R Each setting is explained in this section.System notifications[Arm Alert]This setting determines whether a notification is displayed when the alarm system is triggered.[Arm Mode Change]This setting determines whether a notification is displayed when the arm mode is changed by anotherdevice.[Entry Delay Start]This setting determines whether a notification is displayed when the entry delay timer is counting down.[Device Error]This setting determines whether a notification is displayed when a device error is detected, such as lowbattery, disconnection, etc.96Using the app
