Panasonic KM5070 Operating Instructions Manual

EN11EnglishAfter UseStoringNote:• Do not wrap the Cord around the Motor Housing.• Mount the Blender Jug onto the Blender Jug Base and store it.• Mount the Mill Container onto the Mill Container Base and store it.CleaningNote:• During prewash, do not fi ll in the normal water more than the amount indicated. It may cause high vibration.• After prewash, unplug the appliance before cleaning. Handle the Cutting Blades and glass parts carefully duringcleaning.• Do not use benzene, thinner, alcohol, bleach, polishing powder or metal brush to clean the appliance. The surfacemay be damaged.• Do not place the appliance in the dishwasher or the dish dryer for cleaning.• Some discolouration of the plastic parts may occur upon usage but it does not affect usage.• Make sure to clean the appliance after every use.• Do not use water or hand to clean the Mill Cutting Blade.Cleaning with a brush• Wipe the Motor Housing with a damp cloth.• Clean the Mill Container Base and the Mill Cutting Blade with a brush.Do not use water or hand to clean the Cutting Blades.* Brush is not provided.Prewash• For Blender, fi ll in 750 mL of normal water. Press P2 while holding theBlender Jug by hand and operate for 3 to 10 times for cleaning. 15001000500Wash• Before cleaning, make sure to take out the Blender Gasketand the Mill Gasket.• Wash with diluted dish soap (neutral) and a soft sponge. Afterwashing, be sure to rinse and wipe dry thoroughly.Wiping15001000500