WARNINGThis service information is designed for experienced repair technicians only and is not designed for useby the general public. It does not contain warnings or cautions to advise non-technical should bepotential dangers in attempting to service a product. Products powered by electricity should beserviced or repaired only by experienced professional technicians. Any attempt to service or repair theproduct or products dealt with in this service information by anyone could result in serious injury ordeath.Design and specifications are subject to change without notice.Caution(1) High voltage is applied to inverter transformer, cable and capacitor on the backlight PCB and backlight connector shown inFig. 1 below.Do not touch those parts without switching off JS-170FR, expect for probes of oscilloscope or tester for testing or repairingpurpose only.Fig.1Do not touch the parts within this spot,without switching off JS-170FRLCD UnitBacklight PCB Assy(2) High voltage (230 V DC) is applied to heat sink (indicated by arrow) on Power Supply PCB Unit shown in the Figure below.Do not touch this part without switching off JS-170FRDo not touch the parts within this spot,without switching off JS-170FRPower Supply PCB Unit