Panasonic HX-A1M Operating Instructions Manual

Also see for HX-A1M: Basic owner's manual Basic operating instructions Manual

Contents

- 38 -When connecting to the Main Camera for the first time:The Wi-Fi lamp flashes (green) fast. When the connection is complete, the Wi-Fi lamp will lightgreen and you will hear an alert sound.≥ Main Camera information (SSID, etc.) will be saved to this unit.When connecting for the second time or later:The Wi-Fi lamp will flash green, and this unit will connect to the Main Camera using the MainCamera information that was saved to it.When the connection is complete, the Wi-Fi lamp will light green and you will hear an alert sound.The image transmitted from this unit appears on the Sub Window of the Main Camera.∫ To terminate the connection to the Main CameraPress and hold the recording mode/Wi-Fi button for approximately 2 seconds, and remove yourfinger.≥ The Wi-Fi lamp will go off.∫ To connect to another Main CameraIn Step 3, while the Wi-Fi lamp is flashing green, press and hold the recording mode/Wi-Fi button forapproximately 5 seconds.≥ The Wi-Fi lamp will flash fast (in green).When the connection is complete, the Wi-Fi lamp will light green and you will hear an alert sound.≥ Main Camera information (SSID, etc.) will be overwritten.≥ A connection cannot be established while this unit is recording.≥ When using this unit as a Wireless Sub Camera, you can neither record images with this unit norchange the recording mode.