VQC9867ENGLISH FRANÇAIS ESPAÑOL 한국어Dear CustomerAbout the Upgrade of the HX-A100 FirmwareThe following functions were added or changed by Ver. 1.10 of the firmware.Please read this in conjunction with the owner’s manual for this unit.For the latest information on version updates or for information on the Image App, see thefollowing support site.http://panasonic.jp/support/global/cs/e_cam/index.html(This Site is English only.)After making the settings according to the setup wizard screens, you can use the main functions of this unit.Proceed to complete the setup by following the on-screen instructions.≥ The setup wizard is displayed at the time of purchase and after a long period of non-use duringwhich the battery ran down.1 Synchronize the time of this unit with that of smartphone.≥ Once the clock is set, recording, live broadcasting, and other functions of this unit can be used correctly.≥ It may take approximately 60 seconds to synchronize the time of the smartphone with that of thisunit.≥ If the SSID and the password are set to their defaults, a message that recommends you tochange them will be displayed.From the Image App screen, tap # [Camera setup] # [Device info. display] to check thefirmware version.Update the version if it is earlier than Ver. 1.10.To update the firmware of this unit, copy an update file to the microSD card, insert it into this unit,and press the power button to turn on this unit while pressing and holding the Wi-Fi/WPS buttonand the photoshot button.If you are using firmware Version 1.10, use the latest version of the Image App.∫ OS versions that support the Image AppAndroid device: Android 2.3.3 or lateriOS device: iOS 5.0 or later≥ The supported OS versions are current as of April 2014 and subject to change.≥ The service may not be able to be used properly depending on the type of smartphone beingused.The setup procedure using the setup wizard has been changed.ENGLISH