Panasonic HX-A100 How To Upgrade Firmware

Also see for HX-A100: Basic owner's manual Owner's manual Basic operating instructions Firmware upgrade

2VQC9867 (ENG)2 Make the connection settings for the access point mode to usedevices connected to a wireless router, etc.≥ Enter the SSID and password (authentication key) of the access point.≥ If your device is Android, you can enter them using .∫ When connecting by (If the device is Android)1 Tap .2 Tap the wireless access point to connect.3 Enter password.≥ This allows you to operate this unit via an access point using your smartphone.3 Make the connection destination settings for a live broadcast.≥ Enter the SSID and password (authentication key) of the access point.Up to three access points can be registered. Register the access point you use, such as thewireless router in your home or the mobile router you use outside.≥ You can perform a live broadcast by setting the following.j Make the live broadcast settings. (For the live broadcast settings, refer to the owner’s manualfor this unit.)≥ The settings can also be made from the Image App menu.You can use the Wi-Fi Easy Setup by settting up a Wi-Fi connection between this unit and asmartphone.For settings on the Setup menu, tap # [Camera Wi-Fi settings] # [Wi-Fi Easy Setup] #respective items on the Image App screen.Proceed to complete the setup by following the on-screen instructions.*1 In Live broadcasting mode, you can register up to three wireless access points; in Access pointmode, you can register only one access point.*2 Acquire a Login ID and Password for the “LUMIX CLUB” in advance.≥ It may take approximately 60 seconds to synchronize the time of the smartphone with that of thisunit.≥ If your device is Android, you can tap to run an SSID search when setting wireless accesspoint information.For compatible access points, see the following support site.http://panasonic.jp/support/global/cs/e_cam/index.html (This Site is English only.)The Wi-Fi Easy Setup function has been added.With [Wi-Fi Easy Setup], you can set the following information:j Clock information (Synchronize the clock information with that of the smartphone)j Information on wireless access points (SSIDs and Passwords) *1j “LUMIX CLUB” Login ID, Password *2