Panasonic EY4542 Operating Instructions Manual

Also see for EY4542 - CIRCULAR SAW 14.4V: Operating instructions Operating instructions Operating instructions Service manual Operating instructions

Contents

- 14 -Retracting handleHex boltLoosenTightenOuter washerPlace the protrusion of the outerwasher into the position of thewasher.Lower guardInner washerPlace the inner washer with cut-outfacing you.Spindle lock buttonFig. 6Using the ToolCAUTION:To reduce the risk of injury read the SafetyInstructions at the front of this manual beforeusing the tool.WARNINGTo reduce the risk of injury, wear safety gog-gles or glasses with side shields while using thetool. Additionally, wear a dust mask when cuttingmaterials that generate excessive particulatematter. Do not use tool in the rain. Doing so mayresult in electric shock or cause the tool to emitsmoke.Do not cut materials on which there is anypaint thinner, gasoline, oil, or similar build-up.Doing so may cause the dust case to crack,resulting in injury.Follow these steps:Hold the tool with both hands. (See Fig. 8) Donot attempt to remove cut material when bladeis moving.1. Line up the sight line on shoe with your cut-ting line. (See Fig. 7)Alignment with cutting line• Position the notch on the shoe over the cuttingline, aligning the top and bottom corners of thediamond-shaped opening with the line.As the cutting position may differ depending onthe blade, do a trial cut beforehand.Cutting lineNotchFig. 72. Press the switch lock lever down, thensqueeze the power switch to start the motor,and then release the switch lock lever.