Panasonic EY3552 Operating Instructions Manual

Also see for EY3552 - 18V METAL SAW: Operating instructions

Contents

- 16 -VI. ACCESSORIESWARNING•The use of any accessories not specified inthis manual may result in fire, electric shock,or personal injury. Use recommended acces-sories only.•Use of a blade on material that is thicker orthinner than that recommended for that bladewill result in a rough cut, and could increasethe risk of “kickback” or other injury.Blade for cutting metal material•EY9PM17AFor cutting unhardened ferrous materialThickness of material0.3 mm - 6.0 mm (1/64" - 15/64")Blade for cutting thin metal material (Optionalaccessory)•EY9PM17BFor cutting unhardened thin ferrous materialThickness of material0.3 mm - 2.0 mm (1/64" - 5/64")Rip Fence (Optional accessory)•EY3500B7727For convenience of rip cuts and repeated cut ofuniform widthBattery Pack•EY9251Battery Charger•EY0110VII.SPECIFICATIONSMetal Cutter (EY3552)Motor voltage 18 V DCBlade Speed 2900 /min (rpm)Blade SizeOutside diameterArbor size165 mm (6-1/2")20 mm (25/32")Maximum cutting depth 3 - 56 mm (1/8" - 2-13/64") (φ165mm blade)Dimensions (L × W × H) 345 × 198 × 264 mm(13-37/64" × 7-51/64" × 10-25/64")Weight (with battery pack) 4 kg (8.82lbs)Battery Pack (EY9251)Storage Battery Ni-MH BatteryVoltage 18 V DC (1.2 V × 15 cells)Battery Charger (EY0110)Model EY0110Electrical rating See the rating plate on the bottom of the charger.Weight 0.78 kg (1.72 lbs)Charging time 65 minutes (EY9251)NOTE:• Do not charge “Y” type Ni-Cd battery packs.• For applicable battery packs to this charger, see the label on the charger or the latest generalcatalog.