Panasonic ER-Q Instruction Manual

Panasonic ER-Q Instruction Manual Manual pdf 1 page image

3 INPUT AND OUTPUT CIRCUIT DIAGRAM4 MOUNTINGBe sure to turn off the power before carrying out angle adjustment for thisproduct, otherwise accidents or problems with operation may occur.If installing this product directly to the enclosure, use M3 screws. (M3 screwsshould be arranged separately.)If using the ER-QMS1 (optional mounting bracket), use the screws provided withthe mounting bracket.If using SUNX mounting bracket or screws other than the ER-QMS1, do not usescrews which are longer than 10 mm, otherwise they may cause damage tointernal parts when fastened.Tightening torques are 0.5 N m for M3 screws and 1.2 N m or less for M4 screws.If using several of these products alongside each other, leave a space of 50 mmor more between each product, otherwise product performance may be adverselyaffected.[If installing this product directly to the enclosure][If using the ER-QMS1 (optional mounting bracket)]5 OPTIONS6 CARE AND MAINTENANCEBe sure to turn off the power before carrying out cleaning and maintenance.The discharge needle has a sharp point, so be very careful when cleaning theneedle.After long periods of use, dirt may adhere to the discharge needles, the areaaround them and the filter. If these areas are not cleaned, charge removalperformance will drop and accidents or problems with operation may occur.Therefore they should be periodically cleaned (discharge needles: about onceevery week, filter: about once a month).INSTRUCTION MANUALStatic Remover Ultra-compact Fan IonizerER-Q CMJE-ERQ No.0053-70VThank you very much for using Panasonic products. Please read thisInstruction Manual carefully and thoroughly for the correct and optimum useof this product. Kindly keep this manual in a convenient place for quickreference.WARNINGNever use this product with a device for personnel protection.In case of using devices for personnel protection, use products which meet lawsor standards, such as OSHA, ANSI or IEC etc., for personnel protection applicablein each region or country.Do not use this product in places where there may be a danger of flammable orcombustible items being present.Clean the equipment regularly (discharge needles: about once every week, fi lter:about once a month), otherwise optimum charge removal performance may not beobtained and fire or operating problems may occur.If this product is used in an airtight room, ozone emitted from this product may bedetrimental. Therefore, in order for this product to be used in an airtight room, besure to keep the room ventilated.Do not direct ionized air toward the face. Ozone may cause irritation to placessuch as the nose and throat.Since the tip of the discharge needle is sharp, take suffi cient care in handling thedischarge needle, or injuries may result.Be sure to ground the frame ground (F.G.) terminal, otherwise electric chargeremoval may not be reliable.Take care not to let any foreign objects get into the fan air inlet, otherwiseaccidents or operating problems may occur.1 OUTLINEThis is a static charge remover which utilizes ion generation by means of coronadischarge.It has a compact shape, so that it can be positioned either vertically or horizontally.It is equipped with an automatic stop function which operates when the dischargeneedle unit has been removed.2 PART DESCRIPTIONIon air outletDischarge needle unit586552603.529333.5Filter coverAlarm indicator(red)2-Φ3.5 mmmounting holeDischarge indicator(green)Power switchFan speed control(Note 1)Φ3.7 mm cableConnector 5559-08Pmanufactured by MOLEX2-M3 screws (depth 10 mm) (Note 2)25.419.85.5Notes: 1) Fan speed controlThis is set to MAX fan speed at the time of shipment from the factory.Use a precision screwdriver (-) to adjust the fan speed.2) Screw threads exclusive for SUNX mounting brackets. Do not use them in mounting withother products.When mounting this product directly to a case or such, fi x it with M3 screws using 2-Φ3.5mounting holes.Description of indicatorsDischarge indicator (DSC) ... Lights during discharge(when ions are being generated)Alarm indicator (ALARM) ... Lights when discharge error or discharge checkingoccurs, blinks when fan error occurs.M3 screwSpring washerFlat washer* The M3 and M4 screws are included with the ER-QMS1.Install bracket 1 to the main unit with the M3 screws.Install bracket 2 to the main unit with the M4 sems screws, and then use the M4 screwmounting holes to install to the enclosure.2-M3 screw(depth 10 mm)M3 sems screwBracket 1M4 screwmounting holeM4 sems screwBracket 2AC adapterModel No. Details Model No. DetailsModel No. DetailsModel No. DetailsModel No. DetailsReplacement discharge needle unitUnit with tungsten needlesReplacement air filter5-piece air filter setCable with connectorsCable length 2 mCable length 5 mMounting bracketMounting bracket for airdirection adjustmentIN: 100 to 240 V AC, 50/60 Hz, 40 VAOUT: 24 V DC, 750 mAER-VAPS1ER-QANTER-QFX5ER-QCC2ER-QCC5ER-QMS124 V DC±1030 VDC MAXD 1Tr1ZD1D 2LoadCOM (+)50 mA MAX(Black) Error outputTr2ZD 2D 3LoadCOM(-)50 mA MAX(Orange) Check output(Green) F.G.(Brown) +24 V(Blue) 0 VInternal circuits User’s circuitsMain circuitD1 : Power supply reverse connectionprotection diodeD2, D 3: Output protection diodesZD 1, ZD 2 : Surge voltage absorption Zener diodesTr 1, Tr2 : NPN output transistorsConnector pin layout diagramTerminal no. Terminal name Lead wire color0 VCOM (-)N.C. (Not used)F.G.24 VCOM(+)Check outputError outputBlueGreenBrownOrangeBlackFront view

/ 2

Related manuals for Panasonic ER-Q