6RQT9095PlaybackPlaying discs To change the language on the display ➜ 13, Menu Language To play audio ([MP3]), picture ([JPEG]) or video ([MPEG4] [DivX]) on DVD-RAM with recorded titles ([DVD-VR]), select “Play as Data Disc” (➜ 12, OtherMenu). While stopped, the unit automatically turns off once about 15 minutes (about 5 minutes when using the battery pack) have elapsed. Total title number may not be displayed properly on R/RW. If you are experiencing problems, refer to troubleshooting guide (➜ 16).NoteDISCS CONTINUE TO ROTATE WHILE MENUS ARE DISPLAYED. Press [ –OFF] when you finish to preserve the unit’s motor.OperationsOpen the lid.Insert a disc and close the lid. Load double-sided discs so the label for the side youwant to play is facing up. DVD-RAM: Remove discs from their cartridgesbefore use. Some discs start to play automatically when the unitis on.Press and hold.The unit turns on and play begins. When “AUX” is displayed, press [AV SELECT] toselect “DISC”.(➜ 14, Watching video from other equipment)Adjust the volume.When using headphones, turn down the volume beforeconnection.Turn unit on/playWhen the unit is off:Press and hold and the power comes on and play begins.When the unit is on:Press and play begins.Pause Press [ ON] to restart play.StopThe position is memorized when “Press PLAY to resume play” appears on the screen. Press [ ON] to resume. (Resume play)Opening the disc lid or pressing [ –OFF] while “Press PLAY to resume play” is displayed on thescreen cancels the memorized position.Turn unit off Press and hold until “OFF” is displayed.Skip Press [ , ].[DVD-VR] Can also skip to the markers.Search Press and hold [ , ] (up to 5 steps).Press [ ON] to return to normal play.Slow play[DVD-VR] [DVD-V] [VCD]Press and hold [ , ] (up to 5 steps) while paused.Press [ ON] to return to normal play.[VCD] [] onlyTop menu [DVD-V]Playing programs [DVD-VR] (➜ 7)Playback Menu [WMA] [MP3] [JPEG] [MPEG4] [DivX] (➜ 8)Menu [DVD-V]Playing playlists [DVD-VR] (➜ 7)Navigation Menu [WMA] [MP3] [JPEG] [MPEG4] [DivX](➜ 8)Return Returns to the previous screen.[VCD] (with playback control) Returns to the menu.Menu operation Press [ ] to select an item and press [ENTER] to confirm.Number Select[VCD] (with playback control) While the disc menu is displayed,press [DISPLAY] to display On-Screen Menus. Press [ ] to select “Number Select”. Press [ ] then [ ] to enter number.Press and hold [ ] to alter faster. Press [ENTER].Frame-by-frame[DVD-VR] [DVD-V] [VCD]While paused, press [ ].[VCD] [ ] onlyGroup skip[WMA] [MP3] [JPEG] [MPEG4] [DivX]Press [ ]. Does not work while paused.AV SELECTHeadphone terminals []3.5 mm (1/8) stereo mini jack OPEN Clickintoplace ON VOLONOFFTOP MENUMENURETURNENTER