35Chapter 2 Scan/Email OperationsInsert the SD Memory Card as illustrated.(Label side up)4 Select “Attachment”.5 Select “SD Card”.z Only one storage device can be selected ata time.If there are no photos on the SD MemoryCard, a file list is displayed instead of theThumbnail image(s).When “File List” is selected, select folderand image on the SD Memory Card, andthen select “Start”.z The default directory can be set to displayeither “DCIM” (a folder for digital cameraimages) or “Scan Img” by changing thesetting of the Function Parameter “30 SD/USB Memory Def. Dir.” (Scanner Settings >General User Mode).For more details on this setting, refer toScanner Settings in the OperatingInstructions (For Function Parameters) ofprovided CD-ROM.z The default display type can be set to either“Thumbnail” or “File List” by changing thesetting of the Function Parameter “31 SD/USB Mem. Disp. Type” (Scanner Settings >General User Mode).For more details on this setting, refer toScanner Settings in the OperatingInstructions (For Function Parameters) ofprovided CD-ROM.zIf the setting of Function Parameter “70 SD/USB Memory Function” (General Settings> Key Operator Mode) is set to “No”, theConfirmation screen displays the “Functionnot available” error message and beeps.zIf you do not touch any key for 3 seconds, orselect “Close” on the Touch Panel Display,the machine will display the previous screen.For more details, refer to General Settingsin the Operating Instructions (For FunctionParameters) of provided CD-ROM. Scrolling Pages6 Select Thumbnail(s).Select one or more Thumbnail(s), and thenselect “OK”.zOnly JPEG files are displayed asThumbnails. Some JPEG file(s) may not bedisplayed as Thumbnails.zUp to 80 image files in a folder can beselected at a time.zOnly one folder can be selected at a time.To scroll to the previous pageCurrent pageTotal number of pagesTo scroll to the next pageContinued on the next page...