Panasonic DMR-EA18K Operating Instructions Manual

Contents

10RQT9048Setting the Set Top Box Control and ClockPreparation:Turn on the television and select the appropriate videoinput to suit the connections to this unit (Example: AV input).When using the set top box, make sure it is turned on.These are the first settings you make upon buying theunit. You don’t need to make these settings again.•••to turn the unit on.When this unit is connected to a Panasonic TV (VIERA)supporting HDAVI Control 3 via an HDMI cable (➔ 9), itacquires the setting information from the TV. When theQuick Start Setting screen appears (➔ below, step 4)•Language:e, r to select, thenWhen the Quick Start Setting screenappears after this step (➔ below, step 4)•EnglishEspañolFrançaisPress OKPulse OKAppuyer sur OKSelect LanguageSeleccione el idiomaSélection de langueTV Aspect Ratio:e, r to select “4:3 TV” or“16:9 Widescreen TV”, thenAspect Ratio SelectionSelect TV type and press OK.(Please refer to Operation Instructionfor details)4:3 TV16:9 Widescreen TV16:94:3When connecting to a 4:3 standard aspect TV:Select “4:3 TV”.When connecting to a 16:9 widescreen TV:Select “16:9 Widescreen TV”.••Quick Start Function:e, r to select “On” or “Off”,thenQuick Start SettingThe unit can be turned on faster, in about1 second. Please note that Quick Startmode slightly increases powerconsumption when the unit is off.(See Operation Instructions for details)Turn Quick Start on ?OnOffSet Top Box Control Settings:e, r to select “Yes”, thenIf you do not control your set top box withthis unit: Select “No”.The unit then displays “Set Clock Manually”screen (➔ 12, step 10).•STB (Set Top Box) IR SettingsThis unit can control your STB(Set Top Box), when connected to IN1input using the Set Top Box Control cable.Start setup now?YesNo12Tips“Quick Start” function (➔ 43)If you set Quick Start to on, you can startrecording to DVD-RAM about 1 secondafter you press [^ DVD POWER] to turnthe unit on and then sequentially press[* REC].The following happens when you haveselected “On”.Power consumption in standby modeincreases because power is supplied tothe unit.To view programs from the set top boxIf the TV is not directly connected to theset top box, then turn on this unit in thefollowing cases:“Quick Start” is “Off”.“Quick Start” is “On” with this unit beingconnected to the TV via a component orHDMI cable.To zoom in on video1. Press [SUB MENU],2. Press [e, r] to select “Zoom In”, thenpress [OK].To return to the previous screenPress [RETURN].•–•––•