Panasonic DMR-E85H Operating Instructions Manual

Also see for DIGA DMR-E85H: Operating instructions Operating instructions Operating instructions Operating instructions Operating instructions

Contents

47RQT7460ReferenceError messagesOn the television PageOn the unit’s displayCannot finish recordingcompletely.≥The programme was copy-protected.≥The HDD or disc may be full.——Cannot playback this title.TV system is different from thesetting.To playback this title, pleasechange the TV System inSETUP.≥You tried to play a title recorded using a different encoding system from that of the TVsystem currently selected on the unit.Alter the “TV System” setting on this unit to suit.41Cannot record on the disc. ≥The disc may be dirty or scratched. 51Please check the disc.Unable to format.Cannot record. Disc is full. ≥Create space by erasing any unnecessary titles. [HDD] [RAM]≥Use a new disc. [RAM] [DVD-R]22, 27, 35—Cannot record. Maximumnumber of titles recorded.Error has occurred. Pleasepress ENTER.≥Press [ENTER] to start recovery process. You cannot operate the unit while it is recovering(“SELF CHECK” appears on the unit’s display).—No Disc ≥The disc may be upside down. —Please change the disc. ≥There may be a problem with the disc. Press [< OPEN/CLOSE] on the main unit toremove it and check it for scratches or dirt. (The unit turns off automatically after you openthe tray.)51This is a non-recordable disc. ≥The unit cannot record on the disc you inserted. Insert a DVD-RAM or unfinalized DVD-R.≥You inserted an unformatted DVD-RAM. Format the disc with this unit.—35This disc is not properlyformatted.Formatting is necessary usingDISC MANAGEMENT.$ ≥The operation is prohibited by the unit or disc. —HDD SLP ≥In order to extend HDD life, the HDD is in SLEEP mode. Press [HDD] to activate. 13HARD ERR ≥If there is no change after turning the unit on and off, consult the dealer where the unit waspurchased.—NO READ ≥The disc is dirty or badly scratched. The unit cannot record, play, or edit.≥You have used a DVD-RAM/PD lens cleaner and it has finished. Press [< OPEN/CLOSE]on the main unit to eject the disc.51—PROG FULL ≥There are already 32 timer programmes. Delete unnecessary timer programmes. 19REMOTE DVD (“∑” stands for a number.)≥The remote control and main unit are using different codes. Change the code on theremote control.Press and hold [ENTER] and the indicated numberbutton at the same time for more than 2 seconds.11SELF CHECK ≥The unit is starting up. Wait until the message disappears. —U14 ≥The unit is hot.The unit switches to standby for safety reasons. Wait for about 30 minutes until themessage disappears.Select a position with good ventilation when installing the unit. Do not block the cooling fanon the rear of the unit.—U99 ≥The unit fails to operate properly. Press [Í/I] on the main unit to switch the unit to standby.Now press [Í/I] on the main unit again to turn the unit on.—UNSUPPORT ≥You have inserted a disc the unit cannot play or record on. 12X HOLD ≥The Child Lock function is activated.Press and hold [ENTER] and [RETURN] simultaneously until “X HOLD” disappears.4247