22RQT7460Playing backPlaying discsRefer to the control reference on page 20.Press [AUDIO].[HDD] [RAM] [VCD]LR>L>R^---------------}[DVD-A] [DVD-V]You can change the audio channel number each time you press thebuttons. This allows you to change things like the soundtracklanguage (➡page 24, Soundtrack).[Note]You cannot change the audio type in the following cases.≥When a DVD-R disc is in the disc tray while DVD drive is selected.≥When the recording mode is XP and “Audio Mode for XP Recording” is set to “LPCM” (➡page 38).≥When “DVD-R Rec for High Speed mode” is set to “On” (➡ page 37).Editing operations during playErase[HDD] [RAM] [DVD-R]1 Press [ERASE].2 Press [2, 1] to select “Erase” and press [ENTER].≥A title cannot be restored once it is erased. Make certain before proceeding.≥You cannot erase while recording or transferring (dubbing).Create Chapter[HDD] [RAM]Press [CREATE CHAPTER].≥Press [:, 9] to skip to the start of a chapter.≥You cannot divide while recording or transferring (dubbing).Changing audioPLAYL RHDDe.g., “L R” is selectedSoundtrack 1 ENG Î Digital 3/2.1che.g., English is selected.The manufacturer accepts no responsibility and offers no compensation for loss of recorded or edited material due to a problemwith the unit or recordable media, and accepts no responsibility and offers no compensation for any subsequent damage caused bysuch loss.Examples of causes of such losses are≥A disc recorded and edited with this unit is played in a DVD recorder or computer disc drive manufactured by another company.≥A disc used as described above and then played again in this unit.≥A disc recorded and edited with a DVD recorder or computer disc drive manufactured by another company is played in this unit.22