Getting startedVQT3C1413Required setting:Set “HDMI Audio Output” to “On” (> 86).(The default setting is “On”.)≥ The HDMI connection supports VIERA Link “HDAVI Control” (> 72).[BWT800] (VIERA Link “HDAVI Control” can only be used on theconnection from the HDMI (MAIN) terminal.)About HDMI cable≥Please use High Speed HDMI Cables that have the HDMIlogo (as shown on the cover).≥When outputting 1080p signal, please use HDMI Cables5.0 meters or less.≥Recommended Panasonic HDMI cable part number:RP-CDHS15 (1.5 m), RP-CDHS30 (3.0 m), RP-CDHS50(5.0 m), etc.≥ You cannot connect this unit to DVI devices that are incompatible withHDCP.Depending on the device, images may not display properly or at all whenconnecting with a DVI/HDMI switching cable. (Audio cannot be output.)≥ If you are connecting to a TV that is only compatible with 2 channelaudio output, audio with 3 channels or more will be down mixed (> 115)and output as 2 channels, even if connecting with an HDMI cable.(Some discs cannot be down mixed.)≥Connect to terminals of the same colour.§ If the unit is connected to the TV with the suppliedAudio/Video cable (> 15), the optional one is required.When the unit is not to be used for a long timeTo save power, unplug it from the household mains socket.This unit consumes a small amount of power, even when itis turned off[approx. 0.2 W (“Power Save in Standby” is activatedand “RF OUT ( Aerial Signal )” is set to “Off”)]Connect the Set Top Box or videoequipment∫ Connecting withAUDIO/VIDEO terminals∫ Connecting with AUDIOand S VIDEO terminalsAV OUTAV INR - AUDIO- L VIDEO S VIDEOSUBAV OUTAV INR - AUDIO- L VIDEO S VIDEOAUDIO OUT VIDEO OUTR LAUDIO OUT S VIDEO OUTR LThis unit’s rear panelSet Top Box, etc.S Video cableAudio/Video cable(supplied)§This unit’s rear panel
