ReferenceVQT3C14108SpecificationsThe audio output differs depending on which terminals areconnected to the amplifier/receiver, and the setting on thisunit. (> 84, Digital Audio Output)≥The number of channels listed is the maximum possiblenumber of output channels when connected toamplifier/receiver compatible with the respective audioformat.§1 When “BD-Video Secondary Audio” is set to “On”, theaudio will be output as Dolby Digital, DTS DigitalSurround or 5.1ch PCM.§2 The audio output is amplified from 5.1ch or 6.1ch to7.1ch depending on the DTS, Inc. specifications.∫ JPEG/MPOPlayable media: HDD, BD-RE (SL/DL), DVD-RAM,DVD-R, DVD-R DL, CD-R, CD-RW,SD Card, USB deviceCompatible pixels:Between 34k34 and 8192k8192 pixels(Sub sampling is 4:2:2 or 4:2:0)Files: JPEG conforming DCF(Design rule for Camera File system)MPO conforming MPF(Multi Picture Format)Maximum number of folders and files:∫ MP3Playable media: HDD, DVD-R, DVD-R DL, CD-R,CD-RW, USB deviceCompression rate: 32 kbps to 320 kbpsSampling rate: 16 kHz, 22.05 kHz, 24 kHz,32 kHz, 44.1 kHz, 48 kHzMaximum number of folders and files:Audio informationTerminal “Digital Audio Output”“Bitstream” “PCM”HDMI AVOUTOutput usingoriginal audio§1BD-Video:7.1ch PCM§1, 2DVD-Video:5.1ch PCMDIGITALAUDIO OUTDolby Digital/DTS DigitalSurroundDown-mixed 2chPCMAbout JPEG/MPO/MP3/DivX/MKV/MPEG2/AVCHD filesMedia Maximumfolders Maximum filesHDD 500 20000BD-RE 500 10000DVD-RAM 500 10000DVD-R 500 10000CD-R, CD-RW 500 10000SD Card 500 10000USB device 500 10000≥ JPEG files must have the extension “.jpg” or “.JPG”.≥ MPO files must have the extension “.mpo” or “.MPO”.≥ This unit is not compatible with MOTION JPEG or PROGRESSIVEJPEG.Media Maximumfolders Maximum filesHDD – 40000DVD-R 300 3000CD-R, CD-RW 300 3000USB device 300 3000≥ MP3 files must have the extension “.mp3” or “.MP3”.
