Panasonic DMP-BD60K Operating Instructions Manual

Also see for DMP-BD60 - Blu-Ray Disc Player: Operating instructions Operating instructions Specifications Operating instructions Service manual

RQT937819Inserting or removing a mediaInserting or removing a disc1 Press [< OPEN/CLOSE] to open the disc tray.2 Insert or remove the disc≥Press [< OPEN/CLOSE] again to close the disc tray.≥DVD-RAM: Remove discs from their cartridges before use.≥Insert double-sided discs so the label for the side you want to playis facing up.Inserting or removing an SD cardInserting an SD card1 Pull to flip down the front panel.2 Insert the SD card into the SD card slot.≥Press on the center of the card until it clicks into place.Removing the SD cardPress on the center of the card and pull it straight out.≥When the card indicator (“SD”) on the unit’s display is flashing, thecard is being read from or written to. Do not turn off the unit orremove the card. Such action may result in malfunction or loss ofthe card’s contents.Inserting or removing a USB deviceInserting a USB device≥Before inserting any USB device into this unit, ensure that the datastored therein has been backed up.≥Check the orientation of the USB connector and insert it straight in.≥Some USB devices inserted into this unit may cause this unit tostop operating. Such USB devices cannot be used on this unit.1 Pull to flip down the front panel.2 Insert the USB device into the USB port.Removing the USB deviceComplete all USB device-related operations and pull the USB devicestraight out.≥When the USB device indicator is flashing, the USB device is beingread from. Do not turn off the unit or remove the USB device. Suchaction may result in malfunction or loss of the USB device’scontents.Since the physical size of USB devices can vary, pleaseconsider its width when connecting any USB device to this unit.It is possible that some devices may accidentally activate theplayback button and cause this unit to not operate properly.– In such cases we recommend using a USB extension cable (notincluded).SDCARDInsert the card’s label up, positioning the cut off corner to the right.SDCARDPlaybackBasic play (Playing video contents)Instructions for operations are generally described using the remotecontrol in these operating instructions.[DivX]: [BD80] onlyPreparationTurn on the television and select the appropriate video input on the television.1 Press [Í POWER] to turn on the unit.2 Insert the media (D left).Play starts.≥If play does not start, press [1] (PLAY).≥If a media with data in different file formats isinserted, the file selection menu is displayed.Press [3, 4] to select the desired file format and press [OK].≥If the menu is displayed, press [3, 4, 2, 1] to select the item andpress [OK].≥If the screen prompting you to use the color buttons appears,continue to operate with the color buttons on the remote control.≥DISCS CONTINUE TO ROTATE WHILE MENUS AREDISPLAYED. Press [∫] when you finish to preserve the unit’s motorand your television screen.≥The producers of the disc can control how discs are played. So youmay not always be able to control play as described in theseoperating instructions. Read the disc’s instructions carefully.≥When playing a set of two or more BD-Video discs, the menuscreen may continue to display even if the disc has been ejected.To switch drivesPress [DRIVE SELECT] to select “BD/DVD/CD”, “SD card” or “USBdevice”.≥If a media is inserted while the unit is stopped, the drive switchesautomatically depending on the inserted media.To display menus[BD-V] [AVCHD] [DVD-VR] [DVD-V] [DivX]Press [TOP MENU/DIRECT NAVIGATOR].To show Pop-up menu [BD-V]The Pop-up menu is a special feature available with some BD-Videodiscs. This menu may vary with discs. For the operating method,refer to the instructions for the disc.1) Press [POP-UP MENU].2) Press [3, 4, 2, 1] to select the item and press [OK].≥Pop-up menu also appears by pressing [SUB MENU] and selecting“Pop-up Menu”.≥Press [POP-UP MENU] to exit the screen.OKe.g.,Playback Getting started