Panasonic DMP-BD60 Service Manual

Also see for DMP-BD60 - Blu-Ray Disc Player: Operating instructions Operating instructions Operating instructions Specifications Operating instructions

Panasonic DMP-BD60/BD80Region switching guideWith the mod. chip fitted the player will automatically play DVD's from all regions (1-6),but for Blu-ray disc playback the region must be manually selected.Blu-ray Region switching is done using the player's original remote control while theplayer is in standby mode, by pressing the following buttons:'1' : Select Blu-ray region 'A''2' : Select Blu-ray region 'B''3' : Select Blu-ray region 'C'When the player is powered up out of standby mode the new Blu-ray region will beactive. The selected Blu-ray region will remain active until the player is disconnectedfrom mains power or a new region is selected while the player is in standby mode.Note that the player must fully enter standby mode to allow the mod. chip to change theBlu-ray region, therefore the player's "Quick Start" mode (which keeps the player fullypowered up even in standby mode) must be disabled when changing Blu-ray regions.Blu-ray region switching is possible with any remote channel setting, 1, 2 or 3.