59VQT1P28Advanced (Recording pictures)For details on [REC] mode menu settings, refer to P17.This allows the sensitivity to light (ISO sensitivity) to be set. Setting to a higher figureenables pictures to be taken even in dark places without the resulting pictures coming outdark.Applicable modes: ·[AUTO]/[100]/[200]/[400]/[800]/[1600]Note• When setting to [AUTO], the ISO sensitivity is automatically adjusted to a maximum of [ISO400]according to the brightness. (It can be adjusted to a maximum of [ISO1000] when using theflash.)• The sensitivity automatically switches to between [ISO1600] and [ISO6400] in [HIGH SENS.] inscene mode.• The setting is not available when [INTELLIGENT ISO] is being used. ([ ] is displayed.)• [I.EXPOSURE] is turned off when it is set to [ISO100].• To avoid picture noise, we recommend that you either reduce the maximum ISO sensitivity levelor set [COLOR MODE] to [NATURAL], and then take pictures. (P64)For details on [REC] mode menu settings, refer to P17.In sunlight, under incandescent lights or in other such conditions where the colour of whitetakes on a reddish or bluish tinge, this item adjusts to the colour of white which is closest towhat is seen by the eye in accordance with the light source.Applicable modes: ·¿n• The optimal white balance will differ depending on the type of halogen lighting being recordedunder so use [AWB] or [Ó].> [SENSITIVITY]ISO sensitivity 100 1600Recording location(recommended) When it is light (outdoors) When it is darkShutter speed Slow FastNoise Less Increased= [WHITE BALANCE][AWB]: Automatic adjustment[V]: When taking pictures outdoors under a clear sky[Ð]: When taking pictures outdoors under a cloudy sky[î]: When taking pictures outdoors in the shade[Ñ]: When taking pictures under incandescent lights[Ò]: Value set by using [Ó][Ó]: Set manually