VQT1P2844Advanced (Recording pictures)[REC] mode: ¿Taking pictures that match the scene beingrecorded (¿: Scene mode)When you select a scene mode to match the subject and recording situation, the camerasets the optimal exposure and hue to obtain the desired picture.Slide the [REC]/[PLAYBACK] selector switch to [!].Set the mode dial to [¿].Press 3/4/2/1 to select the scene mode.• You can switch menu screens from any menu item by rotatingthe zoom lever.Press [MENU/SET] to set.• The menu screen is switched to the recording screen in theselected scene mode.∫ About the information• If you press [DISPLAY] when selecting a scene mode in step 3,explanations about each scene mode are displayed. (If you press[DISPLAY] again, the screen returns to the scene mode menu.)Note• To change the scene mode, press [MENU/SET] and then press 1, and return to step 3 above.• Refer to P39 for information about the shutter speed.• The scene mode flash setting is reset to the initial setting when the scene mode is changed.• When you take a picture with a scene mode that is not adequate for the purpose, the hue of thepicture may differ from the actual scene.• The following items cannot be set in scene mode because the camera automatically adjuststhem to the optimal setting.– [INTELLIGENT ISO]/[SENSITIVITY]/[I.EXPOSURE]/[COLOR MODE]• [I.EXPOSURE] is activated automatically in the following scene modes.– [PORTRAIT]/[SOFT SKIN]/[SELF PORTRAIT]/[SCENERY]/[SPORTS]/[NIGHT PORTRAIT]/[PARTY]/[CANDLE LIGHT]/[BABY1]/[BABY2]/[SUNSET]/[HIGH SENS.]1234
