Menu
Panasonic CZ-RWST3 Operating Instructions Manual
Also see for CZ-RWSC3: Installation instructionsQuick referenceOperating instructionsOperating instructionsQuick reference
                                                                                                                                                                                                          |
3. Installing BatteriesEN-5EN1. Remove the cover.2. Insert two AAA alkaline batteries.Put the batteries in with the polarity [+/–] as shown in thefi gure.3. Gently insert one end of an unfolded paper clip(or a similar object that can fit) into the Reset holeand press the reset button inside the hole andthen put the cover back on.Note• Change the batteries when the display of the remote controlgets weak or if it will not work unless close to the receiver.(Alkaline batteries generally last about one year.)• When changing batteries, always use two fresh batteries of thesame make.• If the remote control will not be used for a long period of time,remove the batteries.• Please dispose of batteries appropriately.• After changing the batteries, follow the procedures on the nextpage to reset the current time.HOW TO REMOVE BATTERIES1. Remove the cover.2. Press the battery toward the negative end andlift it out by its positive end. (As shown at right)3. Remove the other battery in the same way.Note• Dispose of the used batteries at the designated location incompliance with the applicable local ordinances.Warning• Do not swallow the battery.• After removing the battery from remote control unit, keep it away from the reach of children.The battery can cause death by suffocation if swallowed.• When inserting the battery, make sure the polarities (+ and -) are correct.Reset holeCover |
Related manuals for Panasonic CZ-RWSC3
Product
Learn More
Legal
Copyright © 2024 OneStart. All Rights Reserved