Panasonic CT-36SX31 Operating Instructions Manual

Also see for CT-24SX11U: Operating instructions Operating instructions Operating instructions

Panasonic CT-36SX31 Operating Instructions Manual Manual pdf 7 page image

6I NSTALLATIONOptional Cable ConnectionsShielded audio and video cables should be used between components. For bestresults:r Use 75-ohm coaxial shielded cables.r Use appropriate input and output connectors, that match your component connectors.r Avoid long cables to minimize interference.AC Power Supply CordCAUTION: TO PREVENT ELECTRIC SHOCK MATCH WIDEBLADE OF PLUG TO WIDE SLOT OF AC OUTLET AND FULLYINSERT. DO NOT USE A PLUG WITH A RECEPTACLE OR OTHEROUTLET UNLESS THE BLADE CAN BE FULLY INSERTED TOPREVENT BLADE EXPOSURE.PROTECT POWER CORDS FROM BEING WALKED ON, ROLLED OVER,CRIMPED, BENT OR PINCHED, PARTICULARLY AT PLUGS, CONVENIENCERECEPTACLES, AND THE POINT WHERE THEY EXIT FROM THE APPARATUS.Cable / Antenna ConnectionFor proper reception, either a cable or antenna connection is required.Cable ConnectionConnect the cable supplied by your local cable company.Note: A cable converter box may be required for proper reception.Check with your local cable company for compatibilityrequirements.Antenna Connectionsr For proper reception of VHF/UHF channels, an external antenna is required. For bestreception an outdoor antenna is recommended.r Antenna Mode must be set to TV.Polarized plug75 Ohm VHF/UHFon back of TVIncoming Cable fromCable CompanyIncoming Cable fromHome AntennaCable PresetCable Mode is preset at the factory. Antennausers must change to Antenna Mode in theSetup Menu.0372 E.Prod.fm Page 6 Thursday, June 14, 2001 10:36 AM