Panasonic CT-36SX31 Operating Instructions Manual

Also see for CT-24SX11U: Operating instructions Operating instructions Operating instructions

Panasonic CT-36SX31 Operating Instructions Manual Manual pdf 11 page image

10I NSTALLATIONVCR Connection(For models CT-27SX31/U, CT-32SX31/U, and CT-36SX31/U)Follow this diagram when connecting your television to a VCR only.Note: VIDEO 1input is a dual-purpose input. It is primarily intended for connectionwith 480i devices such as a DVD player using the Y PB PR component videojacks and Audio L & R jacks. However, it can also be connected toconventional composite video sources such as a VCR, using only the Y/Videojack and Audio L & R jacks. The on-screen label will display Component orVideo 1 depending on which source is connected.Note: The remote control must be programmed with supplied codes to operate theVCR. See Programming the Remote Control in the Remote Control QuickReference Guide.Viewing a television programProcedure1. Select ANT1 in the SET UP menu under Prog Chan (Program Channels).2. Tune the television to the television program you want to view.Viewing a videoProcedurer Option A1. Select ANT1 in the SET UP menu under Prog Chan (Program Channels).2. Press the TV/VIDEO button on the remote control to select the video input (VIDEO 1,VIDEO 2, etc.) connected to your VCR.3. Begin the video.r Option B1. Select ANT2 in the SET UP menu under Prog Chan (Program Channels).2. Tune the television to Channel 3 or 4, depending on your VCR.3. Begin the video.COMPONENTVIDEO INPUTINPUT 1AUDIOLPBPR Y/VIDEOR L VIDEOINPUT 2S-VIDEORPROG.OUTRLTO AUDIOAMPANT 1ANT 2SPLITOUTVCRVIDEO OUTAUDIO OUTLRANT OUT ANT INCONNECTIONS ON BACK OF TV (may vary)CABLES NOT SUPPLIEDIncomingCableUse either theS-Video or Videoconnection.INPUT 3S-VIDEO VIDEO L AUDIO R HPJJack used for 1/8"headpone plugTERMINALS ON FRONT OF TV0372 E.Prod.fm Page 10 Thursday, June 14, 2001 10:36 AM