O PTIONAL EQUIPMENT CONNECTIONS7 Cable Box ConnectionFollow this diagram when connecting your television to a cable box only.Note: The remote control must be programmed with supplied codes to operate the cable box.Viewing a premium (scrambled) cable channelProcedure1. Tune the television to Channel 3 or 4 depending on the RF out setting of the cable box.2. Using the cable box, tune to the premium cable channel you want to view.VCR and Cable Box ConnectionFollow this diagram when connecting your television to both a VCR and a cable box.Note: The remote control must be programmed with supplied codes to operate the VCR and cable box.Viewing a premium (scrambled) cable channelProcedure1. Tune the television to CH 3 or CH 4 depending on the Cable box RF out.2. Using the cable box, tune to the premium cable channel you want to view.Recording a premium (scrambled) cable channelProcedure1. Press the TV/VIDEO button on the remote control to select the video input (VIDEO 1, VIDEO 2, etc.) connected to your VCR.2. Turn the VCR ON.3. Tune the VCR to Channel 3 or 4, depending on your VCR.4. Using your cable box, tune to the premium cable channel you want to record.5. Begin recording.CABLE BOXCABLES NOT SUPPLIEDTERMINALS ON BACK OF THE TVS-VIDEOAUDIOVIDEO/YP BP RPROGOUTLCOMPONENTANTTO AUDIO AMPVIDEO INPUTSIncomingCableRLRLRINPUT 1 INPUT 2VIDEOANT OUTANT INVCRCABLES NOT SUPPLIEDTERMINALS ON BACK OF THE TVS-VIDEOAUDIOVIDEO/YP BP RPROGOUTLCOMPONENTANTTO AUDIO AMPVIDEO INPUTSLRAUDIO OUTVIDEO OUTANT OUTANT INIncomingCableRLRLRINPUT 1 INPUT 2VIDEOCABLE BOXANT OUTANT IN