Panasonic CT 32SX12 Operating Instructions Manual

Also see for CT 32SX12: Operating instructions Operating instructions

Contents

Panasonic CT 32SX12 Operating Instructions Manual Manual pdf 8 page image

6 O PTIONAL EQUIPMENT CONNECTIONSOptional Equipment ConnectionsVCR ConnectionVCRs, video disc players, video game equipment, and DSS equipment can also be connected to the video inputs. See theoptional equipment manual for more information.Note: Input 1 is a dual-purpose input. It is primarily intended for connection with 480i devices such as a DVD player using theY PB PR component video jacks and Audio L & R jacks. However, it can also be connected to conventional compositevideo sources such as a VCR, using only the Y/Video jack and Audio L & R jacks. The on-screen label will displayComponent or Video 1 depending on which source is connected.Note: The remote control must be programmed with supplied codes to operate the VCR.Procedure1. Connect equipment as shown to rear Audio/Video input jacks.2. Select the Video mode by pressing TV/VIDEO button.3. Operate optional equipment as instructed in equipment manual.Front Control PanelPress to select VIDEO 3 input mode.Note: The front control panel located behind the customer control door can be used to access menus and switch video mode whenthe remote control is not available.A second VCR, Camcorder, a video disc player, video game equipment or DSS equipment can also be connected to thevideo inputs. See the optional equipment manual for details.Procedure1. Connect equipment to front Audio/Video input jacks.2. Press TV/VIDEO button to select VIDEO 3 input mode.3. Operate optional equipment as instructed in equipment manual.VCRCABLES NOT SUPPLIEDTERMINALS ON BACK OF THE TVS-VIDEOAUDIOVIDEO/YP BP RPROGOUTLCOMPONENTANTTO AUDIO AMPVIDEO INPUTSLRAUDIO OUTVIDEO OUTANT INANT OUT IncomingCableUse either theS-Video or Videoconnection.RLRLRINPUT 1 INPUT 2VIDEOTV/VIDEOACTION TV/VIDEO CHANNEL VOLUME POWERHPJ S-VIDEO VIDEO L-AUDIO-RINPUT 3ON/OFF INDICATORPOWER ON/OFF CAMCORDERNote: The ON/OFF indicator LED (red) will be lit when set is on.Note: The S-VIDEO connection provides higher quality picture. Itoverrides VIDEO 3 connections. Use INPUT 3, AUDIO Land R with S-VIDEO connection.