Panasonic CT-13R18 Owner's Manual

Also see for CT-13R18: Operating instructions Operating instructions Operating instructions

Contents

Panasonic CT-13R18 Owner's Manual Manual pdf 4 page image

TO MEMORIZE CHANNELSThis TV is equipped with a channel memory feature which allows channels to skip up or down to thenext channel set into memory, skipping over unwanted channels.Before selecting channels, they must be programmed into the TV's memory. In addition to normalVHF and UHF channels, this TV can receive up to 113 Cable TV channels. To use this TV with anantenna, set the TV/CATV menu option to the TV setting. When shipped from the factory, this menuoption is in the CATV setting.“TO MEMORIZE CHANNELS” cannot be selected if the AV mode is selected.TV/CATV SELECTIONPress ACTION and press to select the SET UP mode, then pressACTION.Press t to select MODE mode and then press . Then press orto select the TV or CABLE mode, then press ACTION.Press ACTION twice.123NOTE:Contact your cable company to determine the type of cable system used in your area.AUTOMATIC CHANNEL MEMORY12MANUAL CHANNEL MEMORYPress ACTION and press to select the SET UP mode, then pressACTION.Press s twice to select MANUAL PROGRAM mode and then press .Select the desired channels to be added or deleted using DirectChannel Selection (10 keys. 0-9), CH s or t.Press or to select ADD or DELETE.If an unmemorized channel was selected (step 3), the channelindicator will be yellow. Press or if you wish to ADD theunmemorized channel. The channel indicator will change from yellowto blue when a channel is added and the channel will be memorized.If a memorized channel was selected (step 3), the channel indicatorwill be blue.Press or if you wish to DELETE the channel from memory. Thechannel indicator will change from blue to yellow when a channel isdeleted.Repeat Steps 3 and 4 for each channel to be added or deleted.Press ACTION three times.453 ADD CH 012SET UPLANGUAGE/IDIOMA/LANGUEAUTO PROGRAMMANUAL PROGRAMCC/ACTION: OFF/ /MODE : TV CABLEPICTURELOCKEXITTIMERSET UPPress ACTION and press to select the SET UP mode, then pressACTION.Press t twice to select AUTO PROGRAM mode and then press .The TV will begin memorizing all the channels available in your area.Press ACTION twice.123SET UPLANGUAGE/IDIOMA/LANGUEMODEAUTO PROGRAMMANUAL PROGRAMCC/ACTION: CABLE: OFF/ /SET UPLANGUAGE/IDIOMA/LANGUEMODEAUTO PROGRAMMANUAL PROGRAMCC/ACTION: CABLE: OFF/ /CONNECTION TO OTHER EQUIPMENTThe exact arrangement you use to interconnect various video and audio components to the TV isdependent on the model and features of each component. Check the Owner's Manual provided witheach component for the location of video and audio inputs and outputs.The connection diagrams below are offered as suggestions. You may need to modify them toaccommodate your particular assortment of components. The diagrams are intended to showcomponent video and audio interconnections only.Press the TV/VIDEO to select the AV mode to use the TV as a monitor.Operate your VCR as usual.NOTE:TV/VIDEO only exists in the remote control.CHANNEL VIDEO IN AUDIO INCHANNEL VIDEO IN AUDIO INSYMPTOMS POSSIBLE SOLUTIONS• Make sure the power cord is plugged in.• Try another AC outlet.• Power is off, check fuse or circuit breaker.• Unplug unit for an hour, then plug it back in.• Station or CATV experiencing problems, tune to another station.• Make sure channels are set into memory.• Check antenna or CATV connections, adjust antenna.• Check for sources of possible interference.• Check picture control adjustments.• Station or CATV experiencing problems, tune to another station.• Make sure channels are set into memory.• Station is weak, adjust antenna to receive desired station.• Check for sources of possible interference.• Station or CATV experiencing problems, tune to another station.• Make sure channels are set into memory.• Check picture control adjustments.• Check antenna or CATV connections, adjust antenna.• Check for sources of possible interference.• Station or CATV experiencing problems, tune to another station.• Make sure channels are set into memory.• CATV company is scrambling signal.• Adjust antenna.• Check all CATV connections.• Set TV/CATV menu option to the CATV mode.• Station or CATV system problems, try another station.• Check antenna connections, adjust or re-direct antenna.• Check for sources of possible interference.TV does not operatePoor sound or No soundPoor picture or No pictureHorizontal or diagonal barson screen• Select proper language in the SET UP mode.Display is not shown inyour languageNo reception abovechannel 13No CATV receptionPicture wobbles or driftsPoor reception on somechannels• Batteries are weak, dead or inserted incorrectly.• Remote is out of range, move closer to TV (within 15 feet).• Make sure Remote is aimed at sensor.• Confirm there are no obstructions between the Remote and the TV.• Make sure the power cord is plugged in.• Make sure TV/CATV menu option is in the appropriate mode.• If using antenna, check UHF antenna connections.• No broadcast on station tuned.• Timer is set.• Power interrupted.• TV station experiencing problems or program tuned is not closed captioned.Try another channel.• Check CATV connection or VHF/UHF antenna, reposition or rotate antenna.• Select the Closed caption.Cannot see closedcaptionNo Remote operationTV shuts offAUX(not supplied)To Audio/Video OUT AUDIOVIDEOFront of TVVCRTo Audio/Video OUT(not supplied)Front of TVFront of TV(not supplied)To AV OUTjackTV GAME CHANNEL VIDEO IN AUDIO IN120V, 60Hz54 WattsIC Solid state13" (measured diagonally)260 lines1.0 Watts1-1/2"x2-1/2” Full Range, 8 ohm181 Channel, Quartz PLL Frequency SynthesizedInfrared, Direct Access, 2 x AA batteries (not supplied)VHF 2-13UHF 14-69CATV 1-12520.9 Ibs14-1/8" (W) x 13-15/16" (D) x 13-1/4" (H)75 Ohm (VHF/UHF/CATV) Coaxial InputVideo: 1.0 Vp-p 75 ohmAudio: 300 mV, 47k ohmPoor color or no colorTV/AV SELECTIONIf you connect the TV to a VCR, camcorder or TVgame, through the audio/video in jacks, use theTV/VIDEO to make your selection.Press the TV/VIDEO repeatedly to select thedesired mode."AUX" will display on the screen for 4 seconds.2. To connect the TV to a TV GameThe TV can also be used as a display device formany video games. However, due to the widevariety of different types of signal generated bythese devices and subsequent hook-up variationsrequired, they have not all been included in thesuggested connection diagrams. You'll need toconsult each component's Owner's Manual foradditional information.3. To connect the TV to a camcorderTo playback from the camcorder, connect thecamcorder to the TV as shown.• Station or CATV experiencing problems, tune to another station.• Check sound adjustments (VOLUME and MUTE).• Check for sources of possible interference.AC Power Input:AC Power Consumption:Chassis Construction:Picture Tube:Horizontal resolution:Audio Power Output Rating:Speaker:Tuner Type:Remote Control:SPECIFICATIONS1. To connect the TV to a VCRBefore requesting service, please refer to the following chart for the symptom and possible solution.TROUBLESHOOTING GUIDEWeight:Dimensions:Antenna Input Impedance:Receiving Channels:Input:SETTING TIMERYou can set the TV to turn off after a preset amount time.Press ACTION and press to select the TIMER mode, then pressACTION.Press and then press or to select desired time, then pressACTION.12TIMERSLEEP/ACTION/: 10After the timer is programmed, the display will disappear then reappear momentarily everyten minutes to remind you the timer function is operating.To confirm the timer setting, repeat step 1. The remaining time will be displayed.To cancel the timer setting, select the OFF.Press ACTION twice to select the PICTURE mode.Press s or t to select desired picture, then press .Press or to adjust the setting.ADJUSTING PICTURE123You can adjust the settings for color, sharpness, contrast, brightness and tint.TO RETURN TO INITIAL SETTINGSelect the NORMAL then select SET as in step2.BRIGHTNESSPICTURETINTSHARPNESSincrease brightnessincrease contrastmore vibrant colorgreenish huedecrease brightnessdecrease contrastreduces colorreddish huemakes picture softermakes pictureclearerCOLOR

/ 4

Related manuals for Panasonic CT-13R18