• Before doing repair work, please read the " SAFETY PRECAUTIONS" carefully and fully understand them.• The precautionary items here are divided into " Warning" and " Caution" items.Items in particular which may cause death or serious injury to the service personnel if the work is not performed correctly,are included in the " Warning" table.However, even precautionary items identified as " Caution" also have the potential for serious consequencesif not performed correctly.Important safety precautions are described for all items in both categories. Be sure to carefully follow all of them.• Symbol Indication: This symbol indicates items to which we need to pay attention.In this triangle, a definite precautionary item is described.: This symbol indicates the item to be prohibited.In or close to this circle, a prohibited item is described.: This symbol indicates the items requiring special attention or instruction.In or close to this circle, a prohibited item is described.• After doing repair work, perform a test run to confirm that there are no abnormalities.At the same time, explain the precautions in use to the user.SAFETY PRECAUTIONSWarningBefore performing an overhaul, disconnect the power plug or power cable from the unit.Performing the work with the power supplied to the unit, may cause an electric shock.When repair work or circuit inspection that requires power supply for the air conditioner, is to be performed,do not touch the charging section.Doing so may cause an electric shock.For the step-up capacitor attached to the electric section, perform the repair work after sufficiently discharging it.Insufficient capacitor discharge may cause an electric shock.Do not perform repair work on the electric sections with wet hands.Doing so may cause an electric shock.Do not start or stop the air conditioner by means of connecting or disconnecting the power plug.Doing so may cause an electric shock or fire.When conducting repair work only use components included in the parts list for the corresponding unit and performthe work with the appropriate tools.Incorrect or poor repair work may cause an electric shock or fire.Never modify the unit.Doing so may cause an electric shock or fire.Perform all electric work according to local applicable regulations related to electrical equipment or interior wiringregulation and make sure to use the exclusive circuit.Insufficient capacity to the electric circuit or defective arrangement results may cause an electric shock or fire.Make sure to replace any power cable or lead wire showing any signs of scratch or deterioration.Failure to do so may cause an electric shock, overheating or fire.Make sure that there is no dust on or slack in the power plug and insert fully into the socket.Dust or incomplete connections may cause an electric shock or fire.Do not damage or process the power cord, as it may cause an electric shock or fire.For the wiring between the indoor unit and outdoor unit, securely fix the specified cable onto the terminal plate.Poorly fixed wiring may cause a heat or fire.After connecting the wiring between the indoor unit and outdoor unit, attach the terminal cover securely.Incomplete attachment of the terminal cover may cause overheating or fire.ProhibitProhibitProhibitProhibitProhibit2