51For CS-C18KK, CS-C24KK and CS-C28KKSHi Hi Me HLo CLo Lo- SLo StopHi oMe oManualLo oNormalAuto o o o oQHi Hi-90QMe Me-90ManualQLo CLo-90QuietAuto Hi-100 Me-100 o oManual oCoolingPowerful Auto oManual o oNormal Auto o oManual o oSoft DryQuiet Auto o o• Auto Fan Speed during cooling operation:1 Indoor fan will rotate alternately between off and on as shown in below diagram.2 At the beginning of each compressor starts operation, indoor fan speed increases gradually for deodorizingpurpose.3 For the first time the compressor operates, indoor fan will be switched to Hi fan speed from Lo- after 70seconds from the start of compressor. This cause the room temperature to achieve the setting temperaturequickly.4 During compressor stops, indoor fan will operate at Lo- for the beginning 20 seconds to prevent highervolume of refrigerant in liquid form returning to the compressor.5 After the compressor turned off for 3 minutes, indoor fan will start to operate at Lo- to circulate the air in theroom. This is to obtain the actual reading of the intake air temperature.6 For the resume of compressor operation, indoor fan will operate at Me fan speed to provide comfort andlesser noise environment, after 70 seconds from the restarts of compressor.