Panasonic CQ-DX200W5 Operating Instructions Manual

58 CQ-DX200WBluetooth (continued)Notes:¡ This setting is feasible only in the Bluetooth mode.¡ Each item can be set in the BT HF mode and BTAUDIO mode independently.1 Hold down [VOL-UME] (PUSH SEL:SELECT) for 2sec.or more.2 Press [PUSH SEL:SELECT] to select amode to be adjusted.For using the remotecontrol, use [SEL].3 Perform each set-ting.PAIRINGEstablishment of pairing with the devices to be connectedNote: This is displayed only when no information aboutthe connected devices last time exists.Press [BAND].Notes:¡ To cancel the operation, press [BAND].¡ When pairing is successfully established, “*** CON-NECTED” appears. (*** indicates the device name.)¡ When pairing is not successfully established, “PAIRERR” appears.¡ If 2 minutes elapse before pairing establishment,“TIME OUT” appears.PINCODEThe PIN code of the device with which pairing isestablished shall be entered. (default: 0000)Note: This is displayed only when no information aboutthe connected devices last time exists.1 Use []], [[], [}] and [{] for PIN code entry.2 Press [BAND] to determine the entry.Note: The buttons from [0] to [9] on the remote controlare also available for PIN code entry.✽✽✽✽/CONNECTEstablishment of pairing with the devices last timeconnectedNotes:¡ This is displayed only when pairing is not establishedwith the connected devices last time.¡ *** indicates the device name with connection infor-mation.Press [BAND].Notes:¡ To cancel the operation, press [BAND].¡ When pairing is successfully established, “*** CON-NECTED” appears. (*** indicates the device name.)¡ If 2 minutes elapse before pairing establishment,“ERROR” appears.✽✽✽✽/DISCONNECTCancellation of pairing with the devices currentlyconnectedNotes:¡ This is displayed only when pairing is successfullyestablished.¡ *** indicates the name of the connected device.Press [BAND].Notes:¡ To cancel the operation, press [BAND].¡ When pairing is successfully canceled, “*** DISCON-NECTED” appears. (*** indicates the device name.)¡ If 2 minutes elapse before pairing cancellation,“ERROR” appears.NEW PAIREstablishment of new pairingNote: This is displayed only when information about theconnected devices last time exists.Press [BAND].DELETEDeletion of information about the connected device lasttimeNote: This is displayed only when information about theconnected devices last time exists.Press [BAND].Note: When information is successfully deleted,“DELETED” appears.BT FUNCTION Menu Display