Panasonic CQ-C7300N Operating Instructions Manual

Contents

Panasonic CQ-C7300N Operating Instructions Manual Manual pdf 8 page image

15 EnglishAudio SettingAudio Setting14Main volume adjustment(Setting range: 0 to 40, Default: 18)q : Upw : DownBass adjustment(Setting rang: -12 dB to +12 dB, 2 dB Step, Default:Bass 0)q : Upw : DownTreble adjustment(Setting range: -12 dB to +12 dB, 2 dB Step, Default:Treble 0)q : Upw : DownBalance adjustment(Setting range: L15 to R15 and Centre, Default: Centre)q : Right enhancedw : Left enhancedFader adjustment(Setting range: R15 to F15 and Centre, Default: Centre)q : Front enhancedw : Rear enhancedSubwoofer level adjustment(Setting range : MUTE, -6 dB to +6 dB, 2 dB Step,Default: 0)q : Upw : DownSubwoofer Low Pass Filter(Setting range: 80 Hz, 120 Hz, 160 Hz, Default: 80 Hz)q : Upw : DownHigh Pass Filter(Setting range: Filter OFF, 90 Hz, 135 Hz, 180 Hz, 225 Hz,Default: Filter OFF)q : Upw : DownSQ preset change(Adjustable frequency: 60 Hz,160 Hz, 400 Hz, 1 kHz, 3kHz, 6 kHz, 16 kHz, Setting range: –12 dB to +12 dB, 2dB Step)(Change of SQ Presetting a Page 14)1 Press [VOLUME](SEL: Select) todisplay the menudisplay.2 Press [VOLUME] ( SEL: Select) to selecta mode to be adjusted.3 Turn [VOLUME](Volume) clock-wise or counter-clockwise toadjust.Note: If no operation takes place for more than 5 sec-onds in the audio menu (2 seconds in Main volumeadjustment and 10 sec. in the SQ preset change opera-tion), the display returns to Regular Mode.Various Audio SettingThe sound type changes every time you press [SQ].SQ is a function that can call up various sound types atthe touch of button in accordance with your listeningmusic type.For SQ7, you can also make fine adjustments for SQpresetting, P2-P6, according to your taste.lights when activated.Notes:¡ Each SQ level is changeable. (a see below)¡ Settings of SQ, bass/treble and volume are influencedone another. If the influence mentioned above causesdistortion to the audio signal, readjust bass/treble orvolume.CQ-C7300NBANDFLAT (default)ROCKPOPVOCALJAZZCLUBSound Selection according to Genre(SQ: Sound Quality)Change of SQ PresettingYou can make fine adjustment to the currently selectedSQ presetting in each type (except FLAT).1 Hold down [SQ] (Sound Quality) for 2sec. or more.The targeted SQ preset appears.2 Adjust each frequency.Note: If you press the [DISP] key, the presetting iscanceled. The presetting is active until another SQpreset is called up.[[]: Higher frequency[]]: Lower frequencyq : Level upw : Level down3 Hold down [}] or [{] for 2 sec. ormore to confirm your adjustment.Note: You can select a SQ preset to be targetedwith [}] and [{] (and [2]-[6] on the remote con-trol).4 Hold down [}] or [{] for 2 sec. ormore to confirm your adjustment.The existing adjustment is overwritten with newadjustment.Notes:¡ FLAT is not changeable.¡ The call-up screen is unchanged even after adjustingany SQ preset.¡ If no operation takes place for more than 10 seconds,the display returns to the regular mode and the cur-rent SQ setting is activated until switching to anotherSQ.¡ If you hold down [BAND] for 2 sec. or more on theSQ call-up screen, the presetting that is called up canbe initialized.¡ Other audio settings should be adjusted here as well.(a Page 15)CQ-C7300NBANDBAND