Panasonic CQ-C7105U Operating Instructions Manual

Also see for CQ-C7105U: Service manual Operating instructions

Panasonic CQ-C7105U Operating Instructions Manual Manual pdf 30 page image

30Display SettingAdjustment to display on the DISPLAY menuCQ-C7205U/C7105UDISPLAY Menu Display1 Press [MENU] to display the menudisplay.For using the remotecontrol, hold down[SEL] (MENU) for 2sec. or more.2 Press []] or [[] to display theDISPLAY menu.3 Turn [VOL] to select a function to beadjusted.For using the remotecontrol, use [}] or[{].4 Press [PUSHSEL] to adjust.For using the remote control, use [BAND] (SET).5 Adjust the setting value.6 Press [PUSH SEL].For using the remote control, use [BAND] (SET).7 Press [MENU] to close the menuscreen.For using the remote control, hold down [SEL](MENU) for 2 sec. or more.DEMONSTRATIONSwitching by [PUSH SEL].ON: Demonstration screen at no operation(default)OFF: Regular screenGRAPHIC PATTERN(Default: All)Turn [VOL] to make a selection.All: Sequential display from pattern A to C.Pattern A-CS.A.: 19-band display (Spectrum analyzer)STILL IMAGE PATTERN(Default: All)Turn [VOL] to make a selection.All: Sequential display from pattern 1 to 10No.1-10CLOCK ADJNote: Adjust the clock when “ADJUST” appears on thedisplay.[[] : Adjusting minutes[]] : Adjusting hoursq : Forwardw : BackwardNotes:¡ The graphic pattern and still image are changeable.(a page 31)¡ If corrupted data is selected, “DISPLAY FILE INCOM-PLETE” appears. (a page 32)CONTRAST(Setting range: 1 to 5, Default: Contrast 3)q : Tilting up view anglew : Tilting down view angle