Panasonic CQ-C7105U Operating Instructions Manual

Also see for CQ-C7105U: Service manual Operating instructions

Panasonic CQ-C7105U Operating Instructions Manual Manual pdf 21 page image

CQ-C7205U/C7105URadio English21Up to 6 stations can be preset in AM, FM1, FM2, and FM3respectively.Preset stations can be simply called up by pressing [}](P-SET) or [{] (P-SET).Notes:¡ Direct selection can be executed with [1] to [6] but-tons on remote control.¡ You can switch between 6 and 18 for FM presettingstations. (EACH BAND/ALL BAND)¡ Preset stations are changeable. (Preset Swap)Auto Preset Memory (APM)Stations with good receiving conditions automaticallypreset.1 Select a band.2 Hold down[BAND] (APM)for 2 sec. ormore.The preset stations under best receiving conditionsare received for 5 sec. each after presetting the sta-tions (SCAN). To stop scanning, press [}] or [{].Note: New stations overwrite existing saved stations.Manual station preset1 Tune in to a station.2 Hold down [}] or [{] for 2 sec. ormore.3 Turn [VOL] to select a preset number.4 Hold down [PUSH SEL] for 2 sec. ormore, and the frequency is stored at theselected preset number.Notes:¡ In step 2, a station can be registered by holding downthe numeric button [1] to [6] for 2 sec. or more.¡ To stop presetting stations, press [DISP] (DISPLAY).¡ The operation above allows users to replace the cur-rent station with the station preset in the selectednumber while selecting a preset station. (Preset Swap)Radio Menu Display1 Press [MENU] to display the menu dis-play.For using the remotecontrol, hold down[SEL] (MENU) for 2sec. or more.2 Press [PUSH SEL] to adjust.For using the remotecontrol, use [BAND](SET).3 Press [MENU] to close the menuscreen.For using the remote control, hold down [SEL](MENU) for 2 sec. or more.PRESETPreset range for FM bands: Individual setting for FM1-3 each(default): Setting of FM1-3 togetherStation Preset(APM: AUTO PRESET MEMORY, P·SET: PRESET)