23Set the high temperature mode func-tion to [Normal temperature] or[High temperature].When using the wireless display in ahigh-temperature environment, besure to set the wireless display in thehigh-temperature mode.Battery MenuBy selecting [Battery], the battery status will be displayed.General Wireless Battery Option Version100% Excellent OK CancelRun the refresh battery.When the confirmation message isdisplayed, select [Yes].Once the battery indicator turns green,the battery pack will be completelydischarged, the wireless display willpower off automatically, and thencharging will commence. It takes ap-proximately 2 hours until the powerautomatically goes off through thecomplete discharge of the battery fromthe fully charged state.Allow the battery pack to charge un-til the battery indicator turns green.(While charging, the backlight isturned off automatically.)NOTEThe battery will not be refreshed correctly in the following cases.• When the power of the wireless display is cut.• When the electric power becomes disconnected (e.g., electrical outage, acci-dental removal of the AC adaptor, etc.).(This screen is a sample.)Status : Full ChargeVoltage : 8154mVCurrent : 0mATemperature : 26.2 °C (79.2 °F)Remain : 100%Error : NoneRefresh Battery : ExecuteEnvironment : Normal temperature