Panasonic CF-74 series Operating Instructions Manual

Also see for CF-74 Series: Operating instructions Supplementary guide Supplementary guide Supplementary instructions Operating instructions

Contents

Panasonic CF-74 series Operating Instructions Manual Manual pdf 17 page image

17 Getting StartedUseful InformationTroubleshootingAppendixHard Disk Backup FunctionThe hard disk backup function creates a backup area (storage area) on the hard disk. This area is to back up (store) thehard disk data or to restore the backup data to their original locations.Using this function, you can protect your data when it is lost or corrupted by operational errors or other factors. You donot need other media or peripheral devices to back up or restore hard disk data on this computer.At purchase, the hard disk backup function is disabled. If you create a backup area, the hard disk backup function willbe enabled and you can back up your data.CAUTIONz To disable the backup function after it is enabled, you have to perform the reinstallation procedure (Î page 21).z A backup area cannot be created if the hard disk is already divided into several partitions. Return the computer toone partition, and create the backup area.z If the partition configuration is changed after the backup area is created (creating partitions, changing size, etc.), thebackup function will be disabled. You need to return the computer to the original condition and create the backuparea again.z Do not use the NTFS file system compression function. It may result in insufficient capacity of the backup area.z The hard disk backup function does not accommodate dynamic disks. Do not convert the hard disk to a dynamicdisk.z To input numbers, press the NumLock key and input in the Ten-key mode.z For German keyboard, press Z when you need to press Y.NOTEz The backup area requires at least half of the entire hard disk capacity. If the capacity is not sufficient, the backuparea will not be created.z When the backup area is created, the usable hard disk capacity will be less than half of the original capacity.z The backup area cannot be accessed from Windows. The backup data cannot be copied to CD-R or other remov-able disk media.z When the hard disk backup function is executed, data in the backup area will be overwritten and the data previouslystored will be lost.Preparationz Prepare the following items:• The Product Recovery DVD-ROM (included)• Panasonic CD/DVD drive (included)z Remove all peripherals (except for the CD/DVD drive).z Connect the AC adaptor and do not remove it until hard disk backup is complete.1 Turn off the computer and insert the CD/DVD drive into the multimedia pocket (ÎReference Manual “Multimedia Pocket”).2 Turn on the computer, and press F2 several times while [Panasonic] boot screen is dis-played.The Setup Utility starts up.z If the password is requested, enter the Supervisor Password.3 Select the [Boot] menu and select [IDE MP], and then press F6 until [IDE MP] moves upto the top of the boot priority order.4 Select the [Security] menu and set [CD/DVD Operation] to [Enable].The hard disk backup function cannot back up or restore data correctly if a hard disk problem occurs during databackup or restoring. If an error occurs due to an unexpected malfunction, incorrect operation, or other reason whiledata is being restored, the hard disk data (data before restoration) may be lost.Matsushita Electric Industrial Co., Ltd. will bear no responsibility for any damages suffered by the user (including lossof data) as a result of the use of this function.Creating the Backup Area