Panasonic CF-37 Series Reference Manual

Also see for CF-37 Series: Operating instructions Supplementary instructions Supplementary instructions Reference manual Reference manual

Panasonic CF-37 Series Reference Manual Manual pdf 16 page image

16Resuming OperationSlide the power switchIf the security indicator ( ) is displayed, your password has been set.When the computer enters the standby or hibernation mode by the closing of theLCD panel, it will resume when the LCD panel is opened. If the computer does notresume when the LCD panel is opened, slide the power switch.CAUTIONAfter the display returns, the computer needs a short period of time to reinitialize.This takes about 15 seconds. Do not shut down or restart Windows, or usethe standby or hibernation functions again during this time, as this may sub-sequently cause Windows to operate abnormally.Do not install or remove peripherals while your computer is in the standby orhibernation mode; abnormal operation may result.When operation resumes, serial devices such as a mouse, modem or PCCards may not function properly. In such cases, you will need to restart yourcomputer or reinitialize the individual devices.Windows 2000(a password set in the Setup Utility) does not appear when the computerresumes from the standby or hibernation mode.Standby/Hibernation Functions