Panasonic BT-S950 Operating Instructions Manual

Contents

Panasonic BT-S950 Operating Instructions Manual Manual pdf 5 page image

511 UNDER SCAN switchSelects the scanning mode (over scan screen or underscan screen).(G) : Over scan screen(g) : Under scan screen12 PULSE CROSS switchChecks the retrace period (sync signal) by delaying theinput signal.(G) : Normal screen(g) : Retrace period display screen13 MONO (color off) switchSelects the screen mode (color or B/W). Useful when youwant to check the white balance.(G) : Color screen(g) : B/W screen14 BLUE (blue check) switchSelects the screen mode (normal or monochrome bluescreen). Useful when you want to check the chroma andphase adjustment.(G) : Normal screen(g) : Monochrome blue screenNote:* The PHASE adjustment is effective only in the NTSCcolor system mode.[How to adjust]1. Select the monochrome blue screen mode and inputcolor bar signals in the order of brightness.2. Adjust the CHROMA and PHASE controls until thedensity and brightness of each blue bar are the same.3 4 5 611 12 13 147 8 9 10POWERUNDERSCAN PULSECROSS MONO BLUELINE ALINE B EXTSYNCNTSCPALV.HOLDNTSCPAL 4:316:9CONTRASTBRIGHTCHROMAPHASEVOLUMEAdjust the blue bars to the samedensity and brightness.POWERUNDERSCAN PULSECROSS MONO BLUEEXTSYNCLINE ALINE BNTSCPALV.HOLDNTSCPAL 4:316:9CONTRASTBRIGHTCHROMAPHASEVOLUMES950BT-12=(continued on the next page )