Panasonic BL-C30 Operating Instructions Manual

Also see for BL-C30: Installation/troubleshooting Getting started Installation

Contents

Panasonic BL-C30 Operating Instructions Manual Manual pdf 40 page image

Operating Instructions402.4 Using UPnP™ (Universal Plug and Play)UPnPTM can automatically configure your router to be accessed from the Internet.In order to use this feature, your router needs to support this feature and it must beenabled. Most router manufacturers disable this feature as the default setting. Seehttp://panasonic.co.jp/pcc/products/en/netwkcam/ for details and see yourrouter's manual for how to enable UPnPTM. After the UPnPTM is enabled on therouter, set [Enable] for auto port forwarding.1. Click [UPnP] on the Setup page.2. Set up UPnP.3. Click [Save] when finished.• New settings are saved.• When finished, "Success!" is displayed.4. Click [Go to UPnP page].• The UPnP page is displayed.Setting DescriptionAuto PortForwarding• If the network setting is [Static] or [DHCP], enabling autoport forwarding allows you to access the camera from theInternet.NoteIf the network setting is [Automatic Setup], enable [AllowAccess from the Internet] on the Network page (see page33).Display ShortcutIcon in MyNetwork Places• Enabling it displays a shortcut to the camera in the MyNetwork Places folder.NoteIf you use Windows XP or Windows Me, this feature isavailable. Enable UPnPTM Windows component beforeusing this feature (see page 110).